Table of Contents
Saving Settings to Memory and Using Saved Settings
You can save customized settings and then select the saved settings whenever
you want to use them.
a
Turn on the projector and display an image.
b
Press the [Menu] button, select the Memory menu, and press [Enter].
c
Select one of the following options:
• Save Memory lets you save your current settings to memory (10
memories with different names are available).
• You can save the following settings:
a
• Image menu settings for each color mode
• Video Range and Overscan in the Signal I/O menu
• Light Source Mode and Brightness Level in the
Operation menu
• Color Matching in the Multi-Projection menu (EB-
1485Fi)
• Color Matching in the Management menu (EB-1480Fi)
• A memory name that has already been used is indicated by a
blue mark. Saving over a previously saved memory
overwrites the settings with your current settings.
• Load Memory lets you overwrite your current settings with saved
settings.
• Rename Memory lets you rename a saved memory.
• Erase Memory lets you erase the selected memory settings.
d
Press [Menu] or [Esc] to exit the menus.
• The saved Color Mode is displayed on the right of the memory
a
name.
• To delete all saved memories, select Reset Memory.
g g Related Links
• "Image Quality Settings - Image Menu"
• "Input Signal Settings - Signal I/O Menu"
• "Projector Feature Settings - Operation Menu"
• "Multiple Projector Operation Settings - Multi-Projection Menu"
137
p.205
p.207
p.213
p.233
Table of Contents
