Flange Back Adjustment - Sony CCD-TRV138 Manual
Adjustments
Hide thumbs
Also See for CCD-TRV138:
- Service manual (197 pages) ,
- Operation manual (139 pages) ,
- Specifications (2 pages)
Table of Contents
3. Flange Back Adjustment
(Using the flange back adjustment chart and
subject more than 500 m away)
The inner focus lens flange back adjustment is carried out auto-
matically. In whichever case, the focus will be deviated during
auto focusing/manual focusing.
3-1. Flange Back Adjustment (1)
Mode
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified value
Note 1: Check that the data of page: 0, address: 10 is "00".
Note 2: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 3: Perform the adjustment with the camcorder in horizon-
tal state.
Note 4: Perform "HALL Adjustment" before this adjustment.
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DISPLAY (Menu setting) ................................................ LCD
Preparations before adjustments:
1) Place the Flange back adjustment chart 2.0 m from the front
of the lens.
2) Check that the center of Flange back adjustment chart meets
the center of shot image screen with the zoom lens at TELE
end and WIDE end respectively.
Adjusting method:
Order Page Address Data
1
0
2
6
3
6
4
6
5
6
6
6
Note 5: The adjustment data will be automatically input to page:
F, address: 44 to 54.
Processing after completing adjustment:
Order Page Address Data
1
6
2
6
3
6
4
6
5
0
6
CCD-TRV138/TRV238E/TRV338/TRV438E
RadarW
RadarW
RadarW
RadarW
RadarW
CAMERA
Flange back adjustment chart
(2.0 m from the front of lens)
(Luminance: 300 to 400 lux)
Check operation on monitor TV
F
44 to 54
Data of page: 6, address: 0C is "00"
Procedure
01
01
48
01
01
13
Press PAUSE button.
01
15
Press PAUSE button. (Note 5)
Check the data changes to
02
"01".
0C
Check the data is "00".
Procedure
01
00
Press PAUSE button.
01
25
Press PAUSE button.
01
00
Press PAUSE button.
48
00
01
00
Perform "Flange Back
Adjustment (2)".
3-2. Flange Back Adjustment (2)
Perform this adjustment after performing "Flange Back Adjust-
ment (1)".
Mode
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified value
Note 1: Check that the data of page: 0, address: 10 is "00".
Note 2: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Switch setting:
1) NIGHTSHOT PLUS ........................................................ OFF
2) DISPLAY (Menu setting) ................................................ LCD
Preparations before adjustments:
1) Set the zoom lens to the TELE end and expose a subject that is
more than 500 m away.
(subjects with clear contrast such as building, etc.)
(Nearby subjects less than 500 m away should not be in the
screen)
Adjusting method:
Order Page Address Data
1
0
01
2
6
48
3
6
01
4
5
6
01
6
6
02
7
6
0C
Note 3: The adjustment data will be automatically input to page:
F, address: 44 to 54.
Processing after completing adjustment:
Order Page Address Data
1
6
01
2
6
01
3
6
01
4
6
48
5
0
01
6
6-13
RadarW
RadarW
RadarW
CAMERA
Subject more than 500 m away
(Subject with clear contrast such as
buildings, etc.)
Check operation on monitor TV
F
44 to 54
Data of page: 6, address: 0C is "00"
Procedure
01
01
13
Press PAUSE button.
Place ND filter on the lens so
that the optimum image is
obtain.
29
Press PAUSE button. (Note 3)
Check the data changes to
"01".
Check the data is "00".
Procedure
00
Press PAUSE button.
25
Press PAUSE button.
00
Press PAUSE button.
00
00
Perform "Flange Back
Check".
Hide quick links:
Table of Contents
