This guarantee does not effect your statutory rights. WHAT’S SUPPLIED Unpack your tool and make sure that the following items are present. Should there be any damage caused during transit contact your Clarke dealer immediately. 1 x 20 Volt Cordless Jigsaw...
SAFETY PRECAUTIONS WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/ OR SERIOUS INJURY. THE TERM “POWER TOOL” IN ALL WARNINGS LISTED BELOW REFERS TO YOUR 20V CORDLESS JIGSAW. 1) WORK AREA SAFETY a.
Page 4
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d.
5. BATTERY TOOL USE AND CARE a. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
Page 6
SYMBOLS & PICTOGRAPHS Laser Radiation, Class 2 Laser: Do not stare into the beam Weee Symbol CE Mark Read instruction manual before use KICKBACK Kickback is a sudden reaction to a pinched or misaligned saw blade which causes the saw to lift up and out of the workpiece. When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction moves the unit back quickly towards the operator.
FITTING THE BATTERY PACK (NOT SUPPLIED) This 20V Jigsaw requires a 20V battery pack (6487040) and 1 Hour Charger (6487050) to operate. Both are available separately from your local Clarke dealer. TO FIT THE BATTERY 1. Slide the battery pack on to the jigsaw.
Page 8
ADJUSTMENTS ADJUSTING THE PENDULUM The pendulum moves the blade away from the cut on the down (non-cutting) stroke and forward into the workpiece on the upward (cutting) stroke. The pendulum can be particularly useful when cutting thicker, denser materials. 1. Adjust the pendulum control to suit the material being cut using the following suggested settings as a starting point if required.
OPERATION SWITCHING ON/OFF • Ensure that the workpiece is securely held and the cutting line is clearly marked. 1. Place the sole-plate on the workpiece taking care that the blade is not touching the workpiece or striking on anything below. 2.
LASER GUIDE The laser guide helps keep the blade aligned with the cutting line. 1. Press the Laser on/off button to turn the laser on. • Do not point the laser beam at people. • Keep the laser beam below eye level.
• Only use the replacement blades specified for this product (see your Clarke dealer). • Refer to your Clarke dealer if internal maintenance is necessary. CONSUMABLE SPARE PARTS Replacement saw blades for wood and metal are available from your Clarke dealer. Replacement Blades (10 per pack) Wood: Part no. 6462188 Metal: Part no.
SPECIFICATIONS No Load Blade Speed 0-2400 Strokes per minute Operating Voltage 20 V DC Stroke length 25.4 mm Maximum Blade Length 76 mm Pendulum settings Weight (without battery pack) 1.7 kg Dimensions (without battery pack) (L x W x H) 227 x 74 x 215 mm Sound pressure Level (LPA) 87.3 dB(A)
Page 14
CLARKE ZX-R RANGE The Clarke ZX-R 20V cordless power tools are designed as a high power and quality solution for the tradesman that requires a number of different tool types. Hammer Drill. Jig Saw Model: Model: CDD20Li CJS20Li Part Number:...