GE RAVRG3 Installation Instructions

Before you begin - Read these instructions completely and carefully.

IMPORTANT – OBSERVE ALL GOVERNING CODES AND ORDINANCES.

Note to Installer – Be sure to leave these instructions with the Consumer.

Note to Consumer – Keep these instructions with your Owner's Manual for future reference.

Parts Included

• Return Air Grille/Access Panel with Latch Mechinism

(58" Tall x 29" Wide)

• Mounting Side Bracket

• Latch Bracket

• Mounting Screws

Materials Needed (Field Supplied Parts)

• 25" x 20" Filter

• 5/32" Allen wrench for latch mechanism operation

Installation

Overview

Mounting

Bracket

GE is a trademark of the General Electric Company. Manufactured under trademark license.

Installation Instructions

for your new

RAVRG3

Access Panel with

return air grille

Mounting

Screws

Latch

Mechanism

Return Air Grille/

Access Panel

Frame and sheetrock and access hole to 27" wide and 55 3/4 tall.

The bottom of the opening should be at the same level as the

floor or subbase that the VAC unit is placed on. The chassis must

fit thru this opening. The chassis is 23 1/2" wide and 32 1/4" or

47" tall (consult chassis specifications for actual dimensions).

25" x 20" Nom. Filter

(field supplied)

Filter mounts on the

inside of Access Panel

Door

95303007 31-30823 12-16 GEA

Latch

Bracket

Left

Mounting

Side

Bracket

Return Air Grille/

Access Panel