Table of Contents
Steps
1. Place the side cover on your computer.
2. Slide the side cover towards the front of the system till you hear the release latch click.
Next steps
1. Follow the procedure in
Intrusion switch
Removing the intrusion switch
Prerequisites
1. Follow the procedure in
2. Remove the
Side cover
About this task
The following images indicate the location of the intrusion switch and provide a visual representation of the removal procedure.
Steps
1. Disconnect the intrusion switch cable from the connector on the system board.
2. Slide the intrusion switch from the system .
Installing the intrusion switch
Prerequisites
after working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
13
- Quick Links:
- Wlan Card
- System Diagnostic Lights
Hide quick links:
Table of Contents
