Removing The Ice Cube Container - Miele KF 2981 Vi Operating And Installation Instructions
Hide thumbs
Also See for KF 2981 Vi:
- Operating and installation instructions (132 pages) ,
- Operating and installation instructions (136 pages)
Table of Contents
Removing the dividing panel
(depending on model)
The dividing panel in the freezer basket
can be removed for cleaning:
The dividing panel is secured to the
freezer basket with brackets.
Pull the freezer basket out as far as it
will go.
To release the brackets, use a
suitable object to turn the slots in the
pegs to a horizontal position (1.).
Remove the pegs from the
brackets (2.).
Pull the dividing panel upwards to
remove it.
To reinsert the dividing panel, place
the brackets in an upright position
and position the dividing panel onto
the brackets so that you hear it click
into place.
Insert the pegs into the brackets and
use a suitable object to turn the slots
in the pegs into a vertical position.
Push the freezer basket all the way
back in.
Adjusting the interior fittings
Removing the ice cube
container
The ice cube container can be removed
for cleaning.
Open the lower appliance door as
wide as possible.
Tilt the ice cube container forwards
and pull it up and out to remove it.
Ice cube production does not stop
when the ice cube container has
been removed. Ice cubes can fall
into the freezer basket underneath.
Only remove the ice cube container
for a short time, if possible, or switch
off the ice cube maker beforehand
(see "Making ice cubes - Switching
the ice cube maker off").
97
Table of Contents
