Table of Contents
CIP5000 series storage
3.3.1
Install the cover
Figure 3.7: Installing or removing secure cover
To attach the secure cover:
1.
2.
3.
4.
5.
To remove the cover, unlock it, press the latch release on the left side and pull the left end out
first, holding it with both hands.
Bosch Security Systems B.V.
Make sure the lock is in the unlocked position. To unlock, insert the key into the lock and
turn counter clockwise.
Insert the tab on the right side of the cover into the slot receptacle on the right handle.
Place the cover in position and push in the latch release (to the left of the keyhole).
Push the cover into position so that the tab on the right side inserts into the receptacle
on the right handle when releasing the latch.
Insert the key and turn clockwise to lock.
Quick installation guide
System overview | en
9
2019-10 | V01 | F.01U.380.028
Table of Contents
