1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 1002-X
  6. Overview and installation

Cisco ASR 1002-X Overview And Installation

Show thumbs Also See for ASR 1002-X:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Table of Contents

Quick Links

Cisco ASR 1002-X Router Overview and
Installation
This chapter describes the Cisco ASR 1002-X Router and details the procedures for installing the router on
an equipment shelf, tabletop, or an equipment rack.
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Cisco ASR 1002-X Router Description

The Cisco ASR 1002-X Router is a part of the Cisco ASR 1000 Aggregation Services Routers. The Cisco
ASR 1002-X Router is a compact, small form factor router (SSF) that fulfil customer demands such as low
power consumption and decreased usage of rack space.
The Cisco ASR 1002-X Router supports three half-height SPAs and a built-in 6xGE SPA, as also all the
general-purpose routing and security features of the Cisco ASR 1000 Series Aggregation Services Routers.
The Cisco ASR 1002-X Router supports:
• An integrated embedded services processor that provides a forwarding bandwidth of 5 Gbps, 10 Gbps,
20 Gbps, or 36 Gbps, depending on the Cisco software license that is installed on the router.
Cisco ASR 1002-X Router Overview and Installation
1
Table of Contents
loading

Related Manuals for Cisco ASR 1002-X

Summary of Contents for Cisco ASR 1002-X

  • Page 1: Table Of Contents

    Cisco ASR 1002-X Router Description The Cisco ASR 1002-X Router is a part of the Cisco ASR 1000 Aggregation Services Routers. The Cisco ASR 1002-X Router is a compact, small form factor router (SSF) that fulfil customer demands such as low power consumption and decreased usage of rack space.
  • Page 2 On the Cisco ASR 1002-X Router, the copper small form-factor pluggable (SFP) port's flow control is on, regardless of the duplex setting. In contrast, on the Cisco ASR 1002 Router, the copper SFP port's flow control is off when the duplex setting is Half.
  • Page 3 Front View of the Cisco ASR 1002-X Router Front View of the Cisco ASR 1002-X Router The following image shows the front view of the Cisco ASR 1002-X Router. Figure 1: Cisco ASR 1002-X Router Front View Built-in 6x1GE SPA in slot...
  • Page 4 Two power supplies, either two AC power supplies or two DC power supplies, can be accessed from the rear of the router. Caution Use only the AC power supplies or the DC power supplies in the Cisco ASR 1002-X Router. Do not mix power supply types. Cisco ASR 1002-X Router Slot Numbering The Cisco ASR 1002-X Router contains an integrated SIP that supports three half-height SPAs or one half-height SPA and one full-height SPA.
  • Page 5 LEDs SPA slot 3 The Cisco ASR 1002-X Router has an integrated ESP which is not field upgradeable. Depending on the Cisco optional software license that is installed, the ESP forwarding bandwidth can be software field upgraded from the default bandwidth of 5 Gbps to 10 Gbps, 20 Gbps, or 36 Gbps. For more information about the software license, see the Cisco ASR 1000 Series Aggregation Services Routers Release Notes at: http://www.cisco.com/en/US/docs/routers/asr1000/release/notes/asr1k_rn_rel_notes.html...
  • Page 6 • +24 V DC power supply operates between 21 V dc and 36 V dc The power supplies are installed in the rear of the chassis and are hot pluggable. The Cisco ASR 1002-X Router supports up to 588 W input power from an infrastructure standpoint (cooling capacity, midplane, and power distribution), but the initial power supply development limit is up to 470 W output (AC and DC input).
  • Page 7 The connection order is negative (–), positive (+), and GND. The DC power supply is secured into the system chassis with two captive screws mounted on the faceplate. The following image shows the –48 VDC power supply for the Cisco ASR 1002-X Router. Figure 6: –48 VDC Power Supply for the Cisco ASR 1002-X Router...
  • Page 8 +24 VDC Power Supply for the Cisco ASR 1002-X Router This section provides information about the +24 VDC power supply at the rear of the Cisco ASR 1002-X Router. The recommended branch circuit breaker for the Cisco ASR 1002-X Router +24 VDC power supply is a 40 A UL-listed circuit breaker.
  • Page 9 +24 VDC Power Supply for the Cisco ASR 1002-X Router The Cisco ASR 1002-X Router has two same-type power supplies in power supply slot 0 and power supply slot 1. The power supply slot identifiers are zero (0) on the left side of the chassis, rear side, and one (1) on the right side of the chassis, rear side.
  • Page 10 Two power supplies are used for the redundant operation. The system’s total power consumption should not exceed the rating of one power supply to maintain redundancy. Table 6: Cisco ASR 1002-X Router +24 VDC Power System Output Voltage and Current Output Voltage +12 VDC +3.3 V...
  • Page 11 Any combination of output voltage and current cannot exceed the total power rating of 470 W. The following are the important notes regarding the +24 VDC power supply in the Cisco ASR 1002-X Router: • Output Voltage Alarm Threshold—The Output Voltage Alarm is raised when the output voltage is below the low end of the minimum limit or above the high end of the maximum limit (as shown in the following table).

  • Page 12: Installation Methods

    Power Cord, Japan, Right Angle Installation Methods The Cisco ASR 1002-X Router is designed for a standalone, 2-rail 19-inch rack mount (front rail only), 4-rail 19-inch rack mount (front and rear rail). Although rack-mounting is the preferred method of installation for the Cisco ASR 1002-X Router, you can mount the chassis on an equipment shelf or tabletop.
  • Page 13 Cisco ASR 1002-X Router Overview and Installation General Rack Installation Guidelines • The Cisco ASR 1002-X Router requires a minimum of 3.5 inches (8.9 cm) rack units of vertical rack space. Measure the proposed rack location before mounting the chassis in the rack.

  • Page 14: Guidelines For An Equipment Shelf Or Tabletop Installation

    When installing the Cisco ASR 1002-X Router on an equipment shelf or tabletop, ensure that the surface is clean and that you have considered the following: • The Cisco ASR 1002-X Router requires at least 3 inches (7.62 cm) of clearance at the inlet and exhaust vents (the front, top, and rear sides of the chassis).
  • Page 15 Attaching the Cable Management Bracket, on page 24 shows the cable management brackets attached on the front of the Cisco ASR 1002-X Router. Ensure that the cable management U feature device has the open end pointing upwards when you attach it to...

  • Page 16: Rack-Mounting The Cisco Asr 1002-X Router

    Rack-Mounting the Cisco ASR 1002-X Router The Cisco ASR 1002-X Router can be installed in an existing rack with equipment or in an empty rack with no equipment. The chassis can be mounted on either of these rack types: •...

  • Page 17: Attaching The Chassis Rack Mount Brackets

    Cisco ASR 1002-X Router Overview and Installation Verifying Rack Dimensions Verifying Rack Dimensions Before you install the chassis, measure the space between the vertical mounting flanges (rails) on your equipment rack to verify that the rack conforms to the measurements shown in the following image.
  • Page 18 4. Repeat Step 1 through Step 3 on the other side of the chassis. Use the black screws to secure the rack mount brackets to the chassis. 5. Install the chassis in a rack. To install the Cisco ASR 1002-X Router in a rack, see the information provided in the...
  • Page 19 Step 5 Install the chassis in a rack. To install the Cisco ASR 1002-X Router in a rack, see the information provided in the Installing the Cisco ASR 1002-X Router in a Rack, on page What to do next This completes the steps for attaching the front rack mount brackets to the Cisco ASR 1002-X Router.

  • Page 20: Installing The Cisco Asr 1002-X Router In A Rack

    This completes the steps for attaching the rear rack mount brackets to the Cisco ASR 1002-X Router. Caution To make the installation easier, before you mount the Cisco ASR 1002-X Router in a rack, use the information provided in this chapter to determine which rack mount bracket ear holes to use when positioning the chassis in the rack.
  • Page 21 (See the next sections on the types of racks you can use to install the chassis.) Step 3 (Optional) Install a shelf in the rack to support the Cisco ASR 1002-X Router. This helps support the chassis when you secure it to the rack.
  • Page 22 Caution To prevent injury, avoid any sudden twists or moves. The following image shows where to attach the rack mount brackets to the Cisco ASR 1002-X Router. Figure 13: Attaching the Rack Mount Brackets to the Cisco ASR 1002-X Router...
  • Page 23 Step 1 (Optional) Install a shelf in the rack to support the Cisco ASR 1002-X Router. If you are using a shelf, raise the chassis to the level of the shelf. Let the bottom of the chassis rest on the brackets, but continue to support the chassis. Lift the chassis into the rack using the side handles and grasping underneath the power supply bays, with the help of another person.

  • Page 24: Attaching The Cable Management Bracket

    Step 4 Tighten all the screws on each side to secure the chassis to the equipment rack (see the following image). Figure 14: Cisco ASR 1002-X Router on a Four-Post Rack Front and Rear Rack-Mounting Rear rack equipment rail Front rack mount bracket ear and holes...
  • Page 25 DETAILED STEPS Step 1 Align the cable management bracket to the rack mount bracket on one side of the Cisco ASR 1002-X Router. The cable management bracket aligns to the top hole of the chassis rack mount bracket. Step 2 Using a Phillips screwdriver, insert the screw through cable management bracket and into the chassis rack mount and tighten the screw.

  • Page 26: Attaching A Chassis Ground Connection

    • Dual-lug chassis ground component (two) and respective screws (four) (shipped with the accessory kit) • Grounding wire The following image shows the location of the ground lug on the side of Cisco ASR 1002-X Router. Cisco ASR 1002-X Router Overview and Installation...
  • Page 27 Cisco ASR 1002-X Router Overview and Installation Attaching a Chassis Ground Connection Figure 16: Cisco ASR 1002-X Router Chassis Ground Lug Location Cisco ASR 1002-X Router ground stud location. — — To attach the grounding lug to the chassis ground connector on your chassis, follow these steps: SUMMARY STEPS 1.
  • Page 28 Cisco ASR 1002-X Router Overview and Installation Attaching a Chassis Ground Connection Figure 17: Parts of the Grounding Lug Chassis ground connector holes Ground lug screws Grounding lug Ground wire Step 3 Attach the grounding lug to the wire on the left to avoid having the grounding wire overlapping the power supply.

  • Page 29: Connecting The Spa Cables

    Connecting the Console and Auxiliary Port Cables This section describes how to attach a cable to the console ports or auxiliary ports on the Cisco ASR 1002-X Router. This router uses RJ-45 ports for both the auxiliary port and the console port. On the front panel of the router, the integrated route processor console port and auxiliary port are labeled CON and AUX, respectively.

  • Page 30: Cisco Asr 1002-X Router Power Supplies

    A connection will not be established when setting up an out-of-band connection or modem connection in the auxiliary port and the console port. Cisco ASR 1002-X Router Power Supplies This section describes the Cisco ASR 1002-X Router power supplies and how to connect them: Read the safety warnings before you begin. Warning The covers are an integral part of the safety design of the product.
  • Page 31 This section provides the procedures for connecting AC-input, –48 VDC input power, and the +24 VDC input power to your Cisco ASR 1002-X Router. For detailed instructions for removing and replacing the Cisco ASR 1002-X Router AC and DC power supplies, Chapter 14, “Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers.”...
  • Page 32 1002-X Router AC Power Supply in Slot 0 and Slot 1 with Power Cord, on page Figure 21: Cisco ASR 1002-X Router AC Power Supply in Slot 0 and Slot 1 with Power Cord Cisco ASR 1002-X Router Overview and Installation...
  • Page 33 The order in which the leads should be attached is GND, positive (+), and negative (-). The recommended branch circuit breaker for the Cisco ASR 1002-X Router –48 VDC power supply is 30 A. Use an AWG #10 wire gauge on the 30 A circuit.
  • Page 34 When you install the unit, the ground connection must always be made first and disconnected last. Statement 1046 This section describes how to connect the –48 VDC power supply in the Cisco ASR 1002-X Router: SUMMARY STEPS At the rear of the router, check that the power supply Standby switch is in the Standby (see Figure 24: Cisco ASR 1002-X Router –48 VDC Power Supply Terminal Block Cable Connections, on page 35...
  • Page 35 Figure 24: Cisco ASR 1002-X Router –48 VDC Power Supply Terminal Block Cable Connections, on page 35 ) position. Figure 24: Cisco ASR 1002-X Router –48 VDC Power Supply Terminal Block Cable Connections Ground lead with service loop and tie wrap Negative lead Positive lead –48 VDC power supply Standby switch...
  • Page 36 What to do next You have completed the procedure for connecting a –48 VDC power supply in the Cisco ASR 1002-X Router. Connecting the +24 VDC Power Supply to the Router The +24 VDC power supply uses a spring-loaded terminal block. The input terminal block requires 8 AWG multistrand wiring to support input current.
  • Page 37 • Phoenix Contact 3.5 mm flat-blade screwdriver or equivalent • Wire-stripping tool for stripping 8-gauge wire Figure 25: +24 VDC Power Supply for the Cisco ASR 1002-X Router Components, on page 37 shows the +24 VDC power supply for the Cisco ASR 1002-X Router.
  • Page 38 With the screwdriver still inserted, gently push the lead wire (ground lead first) in until the copper wire, as shown in Figure 28: Cisco ASR 1002-X Router +24 VDC Power Supply Lead Wire Inserted into Terminal Block, on page is no longer visible (see...
  • Page 39 Lead wire insulation Copper wire Figure 29: Cisco ASR 1002-X Router +24 VDC Power Supply Lead Wire Fully Inserted, on page 39 shows the lead wire fully inserted. Figure 29: Cisco ASR 1002-X Router +24 VDC Power Supply Lead Wire Fully Inserted Fully-inserted lead wire —...

  • Page 40: Connecting A Terminal To The Console Port

    What to do next This completes the steps for installing the +24 VDC power supply in the Cisco ASR 1002-X Router. Connecting a Terminal to the Console Port The integrated route processor has an asynchronous serial (EIA/TIA-232) RJ-45 console port labeled CON on its front panel.
  • Page 41 Run the cable up and through the cable management bracket and connect the other end of the RJ-45 cable to the RJ-45 adapter (see Figure 33: Cisco ASR 1002-X Router Console Port Connection on the Route Processor, on page 41).

  • Page 42: Connecting External Cables To The Cisco Asr 1002-X Router

    Connecting External Cables to the Cisco ASR 1002-X Router Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1002-X Router: • To reduce the chance of interference, avoid crossing high-power lines with any interface cables.

Table of Contents