Sealey Viking 2100TB Quick Start Manual

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Refer to

Wear safety

instructions

footwear

1. Safety

ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts. Use

9

recommended parts only. The use of improper parts may be dangerous and will invalidate the warranty.

locate the jack in an adequate, well lit working area for its function.

9

Keep working area clean and tidy and free from unrelated materials.

9

Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.

9

Place wedges under wheels of vehicle (but ensure wheels of jack can move freely ).

9

ensure the vehicle handbrake is engaged (or in "PARKed" mode), and switch the engine off.

9

ensure minimum distance of 0.5m between vehicle tilt & static objects such as doors, walls, etc.

9

ensure all non essential persons keep a safe distance whilst the jack is in use.

9

ensure there are no passengers in the vehicle to be jacked up.

9

Place jack under vehicle manufacturer's recommended lifting points (see vehicle hand book).

9

Check that the lifting point is stable and centred on the jack saddle.

9

ensure the jack wheels are free to move and that there are no obstructions.

9

warning: The jack is a lifting device only.

‰

To support the load always use axle stands (available from your Sealey stockist).

9

ensure there are no persons or obstruction beneath the vehicle before lowering.

9

Use a qualified person to lubricate and maintain the jack.

9

Use only hydraulic jack oil.

9

When not in use store jack in a safe, dry, child proof area in the lowered position.

9

Do not jack vehicle which may result in spillage of fuel, battery acid, or dangerous substances.

8

Do not work under the vehicle until axle stands have been correctly positioned.

8

Do not operate the jack if damaged.

8

Do not exceed the rated capacity of the jack.

8

Do not use the jack for purposes other than which it is intended.

8

Do not top up the hydraulic unit with brake fluid. Use hydraulic oil only.

8

Do not allow untrained persons to operate the jack.

8

Do not allow the vehicle to move whist lifting or lowering.

8

Do not use the jack to move vehicle.

8

Do not adjust the safety overload valve.

8

2. introDuction

dual piece hydraulic unit with heavy-duty long chassis provides easy access to deep set jacking points. lift and twist dead

man's lowering mechanism operates via 'T' shaped handle to provide a smooth, controlled lowering of the load and helps prevent

accidental lowering. Rocket lift feature brings lifting arm into contact with jacking point with minimal pumps. Polyurethane wheels

for smoother manoeuvrability and helps prevent damage to workshop floor. Protective jack handle sleeve helps prevent accidental

damage to car bodywork when pumping the handle. Foot pedal for quick approach of the lifting saddle to the vehicle in confined

spaces. Includes removable rubber saddle pad and built-in tool tray for fasteners and tools. 3 Year Guarantee - 2nd & 3rd

year subject to T's&C's and registration on website (www.sealey.co.uk).

3. Specification

Model ..........................................................................2100tB

Capacity .........................................................................2tonne

min Saddle Height ...........................................................75mm

max Saddle Height ........................................................530mm

max Chassis Height ......................................................150mm

length ...........................................................................940mm

Replacement rubber jack pad ...................................2100TB.A

© Jack Sealey limited

Viking 2tonne Low entry Long reach

troLLey Jack with rocket Lift

2100tB

model no:

Original Language Version

TJL3

Apply

h ndbr ke

1 3 5

2 4 R

Use on

h rd level floor

Chock

wheels

j ck c p city

Close

Lower

OR

Lift & twist

to lower

Use suit ble xle st nds

X2

w w w . s e l e y. c o . u k

2100TB

Issue 1

11/12/19

Never

exceed

R ise

R ise