Blaupunkt Hamburg CD70 Operating Instructions Manual
Blaupunkt radio/cd operating instructions hamburg cd70, phoenix cd70
Hide thumbs
Also See for Hamburg CD70:
- Operating instructions manual (29 pages) ,
- Installation instructions manual (6 pages) ,
- Service manual (16 pages)
Table of Contents
Quick Links
Table of Contents
Related Manuals for Blaupunkt Hamburg CD70
Summary of Contents for Blaupunkt Hamburg CD70
- Page 1 Radio / CD Operating instructions...
- Page 2 Open here Ouvrir s.v.p. Por favor, abrir Favor abrir...
- Page 4 button for opening the control unit Button for switching the device on and off and for muting the device Volume control Softkeys. The function of the Softkeys depends on the contents of the dis- play at the time OK button for confirming menu entries and for leaving the menu DEQ button for calling up the equaliz- er menu...
-
Page 5: Table Of Contents
Notes ... 6 Road safety ... 6 Fitting ... 6 Accessories ... 6 Guarantee ... 6 International telephone information ... 6 KeyCard Theft Protection ... 7 Inserting the KeyCard ... 7 Removing the KeyCard ... 7 Replacing KeyCards / “Training” a second KeyCard ... -
Page 6: Notes
CDC A 06, CDC A 08, CDC A 072 and IDC A 09. If an adapter cable is used (Blaupunkt No. 7 607 889 093) the CDC A 05 or CDC A 071 CD changers can also be connected. -
Page 7: Keycard Theft Protection
Two KeyCards are included with your car ra- dio. If one KeyCard is lost or damaged you can obtain a replacement through your Blaupunkt dealer. If you use two KeyCards, the settings of the first KeyCard are adopted by the first Key- Card. -
Page 8: Second Keycard
To “train” a new KeyCard in case of loss or damage: Insert the first KeyCard and switch the device on. Press the MENU button, 8. button, 7, until Press the “LEARN KC” appears in the display. button, 7. Press the “CHANGE”... -
Page 9: Display Radio Passport Data
Using the KeyCard supplied, you can view Radio Passport data such as device name, type number (7 6 ...) and device number in the display. Press the MENU button, 8. button, 7, until Press the “READ KC” appears in the display. button, 7. -
Page 10: Adjusting The Volume
The volume can be adjusted in steps from 0 (off) to 66 (maximum). To increase the volume, turn the volume control to the right. To reduce the volume, turn the volume control to the left. The volume level of the device when it is switched on can be adjusted. -
Page 11: Tone And Volume
Note: You can make separate adjustments to the bass, treble and loudness for each audio source. Press the AUD button, 9. “BASS” appears in the display. buttons, 7, in order Press the to adjust the bass. When you have finished the adjustment Press the AUD button, 9. -
Page 12: Adjusting The Display
You can adjust the display to its location in your vehicle and to your taste. Press the MENU button, 8. button, 7, as often Press the as is necessary for “ANGLE” to appear in the display. Adjust the viewing angle with the key, 7. -
Page 13: Radio Operation
If the car radio is in another operating mode: Press the TUNE button, >. This device is equipped with an RDS radio receiver. Some FM stations transmit a signal in addition to the program itself containing information such as the name of the station and the type of program (PTY). -
Page 14: Setting The Station
There are a number of ways to set the sta- tion. button, 7. Press the The next station that can be received is tuned You can also tune to the station manually: button, 7. Press the You can choose whether to search only for stations with strong signals, or whether weak stations should be included: Select the waveband (AM or FM) to... -
Page 15: Scanning Through Stations
You can listen to short samples of all current- ly receivable stations. The length of the sam- ples can be set, in the menu, to between 5 and 30 seconds. To start the radio scan: Press the TUNE button, >, when the radio is operating. -
Page 16: Optimising Radio Reception
As soon as a station of the selected type is found, the device switches from the present station, or out of CD, cassette tape, MiniDisc or CD changer mode (depending on how your radio is equipped) to the station with the se- lected program type. -
Page 17: Switching Between Stereo And Mono
Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved. The SHARX function enables you to minimize interference from neighbouring stations. Switch on the SHARX function when stations are crowded. Press the MENU button, 8. -
Page 18: Cd Operation
You can play 12 cm-diameter commercial CDs on this device. So-called CD-Rs (“home-made” CDs) can also usually be played. However, because of the varying CD quality, Blaupunkt cannot guarantee correct function. Rewritable CDs (CD-RWs) cannot be played! There is a risk of damaging the CD... -
Page 19: Repeating Tracks (Repeat)
For information on setting the sampling dura- tion, read the paragraphs on “Adjusting the Sample Duration” in the “Radio Operation” section. Press the softkey, 4, indicating “SCA” again. The track that is currently being sampled will continue to be played. Press the softkey, 4, indicating “RPT”. -
Page 20: Naming Cds
You can delete the whole list of favourite tracks for a CD. The CD whose list of favourite tracks is to be deleted must be inserted. switch TPM on. Hold down the softkey, 4, indicating “CLR” for about five seconds. “CD CLR”... -
Page 21: Cd Changer Operation (Optional)
On page 6 of this guide you can find which CD changers can be used with this device. You can also refer to your Blaupunkt dealer. Note: The operating instructions for your CD chang- er will provide information about handling CDs, inserting them and operating the CD changer. -
Page 22: Sampling All Tracks On All Cds (Scan) . 22 Naming Cds
In order to play the tracks on all the inserted CDs in a random sequence press the softkey, 4, indicating “MIX” again. “MIX MAG” appears briefly on the display. Note: The CDC A 08 and the IDC A 09 will make random selections from all the CDs and all the tracks in the changer. -
Page 23: Programming Favourite Cd Tracks
Listen to a CD in CD changer mode. Press the MENU button, 8. buttons, 7, to select Use the “UPDATE”. button, 7. Press the “CLR ALL” appears in the display. Hold down the OK button, 5. After four seconds “DELETING” appears on the display. -
Page 24: Clock - Time
The clock time can be automatically set by means of the RDS signal. If you cannot re- ceive an RDS station, or if the RDS station to which you are listening does not support this function, it is also possible to set the time manually. -
Page 25: Equalizer
This device has a parametric digital equaliz- er. In this case, parametric means that in each of the three filters, one individual frequency can be emphasised or reduced (with a gain of +8 to -8 dB). The following filters are available: LOW EQ 32 - 200 Hz MID EQ... -
Page 26: Level Meter / Spectrometer
Select “PRESET” with the ton, 7. To select the preset tone, press the button, 7. Press the OK button, 5. When you have completed all the set- tings, press the DEQ button, 6. While you set the equalizer, the level meter in the display gives you a symbolic indication of volume and settings. -
Page 27: External Audio Sources
We recommend that you use matching prod- ucts from the Blaupunkt or Velocity ranges. To prevent speakers from crackling when you switch on the player, you can set a switch-on delay for all amplifiers connected to the Pre- amp Out connection. -
Page 28: Technical Data
Output power: 4 x 25 Watt sine wave according to DIN 45 324 at 14. 4 V 4 x 45 Watt max. power Wavebands: FM : 87.5 – 107.9 MHz AM : 530 – 1,710 kHz FM frequency response: 30 - 15,000 Hz Frequency response: 20 - 20,000 Hz 4 channels:... - Page 29 01 610 39 0 015 762 241 026 130 04 41 800-266 25 28 006 535 054 47 042 175 873 212 Blaupunkt-Werke GmbH Bosch Gruppe K7/VKD 8 622 402 515 Fax: 0 51 21 49 40 02 02.525.54.48 014 010 73 20...