Table of Contents
Tape Operation/Recording
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Tape Playback
1
Press çto open the tape deck door.
2
Insert a recorded tape and close the tape door.
G Load the tape with the open side down and the
full spool to the left.
3
Press TAPE (TAPE 1•2) repeatedly to select
tape deck 1 or tape deck 2.
➜ The selected tape deck number is displayed.
22
4
Press PLAYÉ to start playback.
To stop playback
G Press Ç.
To change the playback mode
G Press AUTO REPLAY repeatedly to select the
different playback modes.
➜ "AUTO REPLAY" ( å ) or "ONCE" will
appear on the display.
AUTO REPLAY ...the tape will rewind
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times until you press Ç.
ONCE .............. the tape will playback the
selected side once and then stop.
To rewind or fast forward when playback
is stopped
1
Press à or á.
2
Press Ç when you reached the desired passage.
To reset tape counter number
G When in stop mode, pressÇ.
➜ "TP1 000" or "TP2 000" will be displayed.
Notes:
– The tape counter will automatically set to zero
after detecting end of tape.
Table of Contents
