Table of Contents
eDP Cable Installation
Route the eDP cable through the guides on the top side first, and then following with the left
1.
side of the LCD cover. While routing the cable, make sure to attach the mylar (closer to the
CMOS and microphone module).
Continue to route the eDP cable through the guides on the bottom left of the LCD cover. Then
2.
attach the mylar to secure the cable position.
Connect the eDP cable to the CMOS and microphone module connector. Then attach the
3.
mylar to secure the cable connection.
Service and Maintenance
Figure 5-178. Routing the eDP Cable
Figure 5-179. Connecting the eDP Cable
5-119
- Quick Links:
- Mainboard Top View
Hide quick links:
Table of Contents
