Table of Contents
5.5.4
Connecting procedure of the power cord
Connect the power cord to the server power supply unit.
Secure the power cords in the cable clamps so the insulated connectors
cannot be accidentally disconnected from the server.
Thread the cable through the cable clamp as shown in
44.
Pull the cable clamp tight to secure the power cord.
Now the insulated connector cannot be accidentally disconnected from the
server.
Connect the mains plug to a grounded mains outlet in the in-house power
supply network or a power outlet of the socket strip in the rack (see Technical
Manual for the rack).
44
Figure 5.7: Cable clamps to secure the power cords
Cisco C880 M5 Installation Manual
Figure 5.7 on page
Table of Contents
