Troubleshooting - Philips CED320/55 User Manual
Philips car entertainment system ced320 8.9 cm (3.5") color screen dvd playback
Hide thumbs
Also See for CED320/55:
- Quick start manual (2 pages) ,
- Service manual (33 pages) ,
- Service manual (33 pages)
Table of Contents
9 Troubleshooting
Caution
•
Never remove the casing of this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this unit,
check the following points before requesting
service. If the problem remains unsolved, go to
the Philips web site (www.Philips.com/support).
When you contact Philips, ensure that your
unit is nearby and the model number and serial
number are available (see 'Get started' on page
10).
No power
•
Car engine has not been started. Start the
car engine.
•
Connections is incorrect.
•
Fuse has been damaged.
'Replace fuse' on page 30).
No sound
•
Volume is too low. Adjust volume.
•
Speaker connections is incorrect.
No response to the remote control
•
Ensure that the path between the
remote control and the unit iis clear from
obstacles.
•
From a close distance, point the remote
control directly at the unit.
•
Replace the remote control battery .
•
The function does not work. Refer to the
instructions.
Disc does not play
•
Disc is upside down. Ensure the printed
side is upwards.
•
Disc is dirty. Clean the disc with a clean,
soft, lint-free cloth. Wipe the disc outwards
from the center.
•
Disc is defective. Try another disc.
•
Imcompatible disc is used. Try another disc.
•
Disc rating exceeds the restric setting.
Change the rating settings to lower one
Replace fuse (see
(see 'Adjust video DVD settings' on page
27).
•
Disc region code is not compatible with
the unit. Use disc with proper region code.
(see 'Region code' on page 34)
No image
•
Parking brake wire connection is incorrect.
Check the parking wiring. (see 'Connect
parking brake cable' on page 13)
Image fl ashes or distorted
•
Video DVD settings do not match with
the DVD. Adjust video DVD settings (see
'Adjust video DVD settings' on page 27).
•
Video connection is improper.
connections (see 'Connect wires: without
ISO connectors' on page 11).
Noise in broadcasts.
•
Signals are too weak. Select other stations
with stronger signals.
•
Check the connection of the car antenna.
•
Change broadcast from stereo to mono
(see 'Select stereo/mono broadcasting' on
page 22).
Preset stations lost.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Fuse is broken
•
The Fuse type is incorrect.
a 15A fuse (see 'Replace fuse' on page 30).
•
Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12
•
USB/SD/MMC data error. Check the USB
device or SD/MMC card.
Check the
Replace it with
EN
33
Table of Contents
