Woodworker's Hardware KV5710 Quick Start Manual

KV5710 Keyboard and Mouse Tray

Carton should contain the keyboard tray subassembly and a hardware kit consisting of:

4- #8 x

1

⁄

" self tapping screws

4

8- #8 x

5

⁄

" mounting screws

8

4- Adjustable mounting brackets with 7 position slots

Knape & Vogt Manufacturing Company guarantees its drawer slides and builder's hardware products

against failure or defects for so long as the purchaser or end user own them. This warranty is void if any

damage to the product is due to misuse, abuse, neglect, accident, improper installation or any used con-

trary to the instructions accompanying the product. This warranty covers the cost of the defective part

and not the cost of removal, installation or other incidental charges. The foregoing are the purchaser's

exclusive remedies. Knape & Vogt Manufacturing Company, Attention: Customer Services Department.

The warranty set forth above is in lieu of any other warranties, express or implied, including warranties or

merchantability and fitness for use.

Assembly, Mounting Installation Instructions

Step 1. Keyboard Preparation (Optional)

It is recommended, but is not required, to disas-

semble the slides from the tray for easier instal-

lation. This is easily done by first depressing the

plastic lever as shown in figure 1 and then

pulling the slide members apart. Repeat for

other slide.

Limited Lifetime Warranty

Figure 1