Table of Contents
MP3-CD/ CD Player
Selecting a different track
• Press ∞ or § once or repeatedly until the
desired track number appears in the display.
For
MP3-CD/WMA: First press ALBUM
+/- once or more to find your album.
➜
"ALBUM" and the selected album number
are displayed and flashed
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold down
∞ or §.
➜ The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release ∞ or §.
➜ Normal playback resumes.
briefly(See
5).
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to start
programming.
➜ Display shows P01 indicating the start of
the program. PROG flashes
2 Press ∞ or § to select your desired track
number.
For MP3-CD/WMA: First press ALBUM
+/- once or more to find your album.
➜
"ALBUM" and the selected album number
are displayed and flashed briefly
3 Press PROG to store the desired track.
➜ Display shows P02, indicating the next
program location available.
4 Repeat steps 2 to 3 to select and store all
desired tracks.
5 Press 2; to play the program.
To review your program
In the stop position, press and hold PROG 3
seconds.
➜ The display shows all the stored tracks in
sequence.
Helpful hints:
–
Display shows P01 if no track is
programmed.
–
If you try to store more than 20 tracks, no
track can be selected and the display will
show
flashing
---.
To erase a program
You can erase a program by:
– pressing 9 (twice during playback or once
in the stop position);
– selecting TUNER,
– opening the disc door.
➜ Display: PROG disappears.
(See
6).
(See
5).
AUX or
OFF position;
Table of Contents
