Table of Contents
General Information
English
Congratulations on your purchase and
IMPORTANT!
Controls on the system and
welcome to Philips!
PLEASE NOTE THAT THE VOLTAGE
remote control
To fully benefi t from the support that
SELECTOR LOCATED AT THE REAR OF
1
Philips offers, register your product at
THIS SYSTEM IS PRESET AT 220V FROM
BAND
www.philips.welcome.com
THE FACTORY. FOR COUNTRIES THAT
–
for Tuner (on the set only) selects waveband.
OPERATE AT 110V-127V, PLEASE ADJUST
2
IMPORTANT!
SOURCE (CD/ TUNER/ AUX)
TO 110V-127V BEFORE YOU SWITCH ON
PLEASE NOTE THAT THE VOLTAGE
–
switches on the system.
THE SYSTEM.
SELECTOR LOCATED AT THE REAR OF
–
selects the respective sound source for CD/
THIS SYSTEM IS PRESET AT 220V FROM
FM/ MW/ AUX.
Supplied accessories
3
THE FACTORY. FOR COUNTRIES THAT
STANDBY-ON / y
OPERATE AT 110V-127V, PLEASE ADJUST
– 2 speaker boxes
–
switches the system to standby/on.
TO 110V-127V BEFORE YOU SWITCH ON
– remote control with 1 x CR2032 battery
4
PROG/CLOCK
THE SYSTEM.
– MW loop antenna
for CD ................. programs tracks and reviews the
program.
Supplied accessories
Environmental Information
for clock .............. sets the clock function.
5
All unnecessary packaging has been omitted.
– 2 speaker boxes
OPEN•CLOSE
We have tried to make the packaging easy to
– remote control with 1 x CR2032 battery
–
opens/closes the CD door.
separate into three materials: cardboard (box),
– MW loop antenna
6
VOLUME – /
+
polystyrene foam (buffer) and polyethylene
–
adjusts volume level.
(bags, protective foam sheet).
Environmental Information
7
TUNING 0
All unnecessary packaging has been omitted.
Your system consists of materials which can be
–
tunes to radio stations.
recycled and reused if disassembled by a
We have tried to make the packaging easy to
8
iR SENSOR
specialized company. Please observe the local
separate into three materials: cardboard (box),
–
infrared sensor for remote control.
regulations regarding the disposal of packaging
polystyrene foam (buffer) and polyethylene
9
n
materials, exhausted batteries and old
(bags, protective foam sheet).
equipment.
–
connect headphones.
Your system consists of materials which can be
0
ÉÅ
recycled and reused if disassembled by a
for CD ................. starts or pauses CD playback.
specialized company. Please observe the local
!
¡1 / 2™
regulations regarding the disposal of packaging
materials, exhausted batteries and old
–
skips to the beginning of a current track/
equipment.
previous/ next track.
–
fast searches back and forward within a track/
CD.
@
STOP 9
–
stops CD playback or erase a CD program.
#
AUX IN
–
connects to external audio source.
$
MUTE
–
switches playback sound off and on.
%
REPEAT
–
repeats a track/ disc/ all programmed tracks.
^
SHUFF (SHUFFLE)
–
plays CD/MP3 tracks in random order.
&
SLEEP
–
activates/deactivates or selects the sleeper time.
*
TIMER
Safety Information
–
activates/deactivates or sets the timer function.
●
Before operating the system, check that the
(
ALBUM 4 3
operating voltage indicated on the typeplate (or
for MP3 disc......................selects an album.
the voltage indication beside the voltage
)
selector) of your system is identical with the
DBB
voltage of your local power supply. If not, please
–
(Dynamic Bass Boost) enhances the bass.
¡
consult your dealer.
DSC
●
Place the system on a flat, hard and stable
–
(Digital Sound Control) selects sound
surface.
characteristics: JAZZ/POP/CLASSIC/ROCK.
●
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
3
and 5 cm (2 inches) from each side.
●
The ventilation should not be impeded by
covering the ventilation openings with items,
CD
2
such as newspapers, table-cloths, curtains, etc.
●
AUX
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
%
REPEAT
caused by heating equipment or direct sunlight.
●
No naked flame sources, such as lighted candles,
&
SLEEP
should be placed on the apparatus.
●
@
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
●
If the system is brought directly from a cold to a
warm location, or is placed in a very damp
!
room, moisture may condense on the lens of
the disc unit inside the system. Should this occur,
the CD player would not operate normally.
Leave the power on for about one hour with
)
DBB
no disc in the system until normal playback is
possible.
●
The mechanical par ts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
●
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the
AC power plug from the wall socket.
Where the MAINS plug or an appliance coupler
Where the MAINS plug or an appliance coupler is
is used as the disconnect device, the disconnect
used as the disconnect device, the disconnect device
Notes for remote control:
device shall remain readily operable.
shall remain readily operable.
– First select the source you wish to
Install the unit near the AC outlet and where
Install the unit near the AC outlet and where the AC
control by pressing one of the source select
the AC power plug can be easily reached.
power plug can be easily reached.
keys on the remote control (for example
Batteries (battery pack or batteries installed)
Batteries (battery pack or batteries installed) shall
CD , TUNER).
shall not be exposed to excessive heat such as
not be exposed to excessive heat such as sunshine,
– Then select the desired function (for
sunshine, fi re or the like.
fi re or the like.
example É , í , ë ).
Controls
$
MUTE
TUNER
4
PROG
^
SHUFF
*
TIMER
0
ALBUM
(
VOLUME
6
¡
DSC
2
- Quick Links:
- Specifications
Hide quick links:
Table of Contents
