Usb alarm box, relay box for monitoring the dakon-xp-pcs and to send messages to a central unit (48 pages)
Summary of Contents for Siemens CAB1-X
Page 1
The Model CAB1-X enclosure from Siemens Industry, Inc., is used to house system modules. The CAB1-X backbox and doors are black. The CAB1-X consists of an outer door, an OD-GP vented grill plate, a mounting plate (CAB-MP), and a backbox as shown in Figure 1.
Mark, drill, and install the two bottom bolts in the backbox. Tighten all four bolts securely against the back wall of the backbox. 26.12 21.25 MOUNTING HOLES FOR 18.00 CAB1-X 27.00 Figure 2 CAB1-X Mounting Holes Siemens Industry, Inc. P/N 315-034369-4 Building Technologies Division...
Page 3
0.25 in. (6.35 mm) or by a noncon- ductive sleeve or nonconductive barrier from all other conductors. If energy limited cable or equivalent is not used within the CAB1-X enclosure, then the following guidelines do not apply. In that case, be sure to follow standard wiring practices.
KNOCKOUTS (16 PLACES) Figure 4 CAB1-X Knockouts POST-INSTALLATION After the backbox is installed and the wiring completed, finish the installation by installing the mounting plate, the outer door, the OD-GP grill plate, and the ground straps.
Page 5
DOOR HINGE Figure 5 Installing The Door On The CAB1-X OD-GP GRILL PLATE CAB1-X DOOR Figure 6 Installing The OD-GP Grill Plate On The CAB1-X Door Siemens Industry, Inc. P/N 315-034369-4 Building Technologies Division...
Page 6
GROUND STRAP ON DOOR Figure 7 Ground Strap Installation Siemens Industry, Inc. P/N 315-034369-4 Building Technologies Division...
Page 7
This page has been left intentionally blank. Siemens Industry, Inc. P/N 315-034369-4 Building Technologies Division...
Page 8
This page has been left intentionally blank. Siemens Industry, Inc. Siemens Building Technologies, Ltd. Building Technologies Division Fire Safety & Security Products Florham Park, NJ 2 Kenview Boulevard Brampton, Ontario L6T 5E4 Canada P/N 315-034369-4...