Quick Links
Set Room ID, PAN ID and RF Channel in INNCOM
Enter Service Mode
Service mode is accessed by executing the following button sequence:
1. Press and hold F/C.
2. Press and release OFF/AUTO.
3. Press and release DISPLAY.
4. Release F/C.
The LCD display will now read "rid" confirming that you are in service mode.
Set Room ID
A unique 5-digit Room ID is required in each INNCOM thermostat.
Enter Service Mode and follow the procedure below to set the Room ID of the thermostat.
1. Scroll to rId
2. Press DISPLAY button and the current Room ID will scroll on the display.
3. After the Room ID scrolls, the highest digit of the Room ID will be displayed with the
HI fan indicator. Use the up or down arrow buttons to change the value and press
OFF/AUTO.
4. The next 2 digits of the Room ID are now displayed along with the MED fan indicator.
Use the up or down arrow buttons to change the value and press OFF/AUTO.
5. The last 2 digits of the Room ID are now displayed along with the LO fan indicator
Use the up or down arrow buttons to change the value and press OFF/AUTO.
6. Press the DISPLAY button to store the new Room ID. The new Room ID will scroll
across the display.
Page 1 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G
E528.4G and E527.4G Thermostats
Example of RID for Room 515 (00515)
Related Manuals for Honeywell INNCOM E528.4G
Summary of Contents for Honeywell INNCOM E528.4G
- Page 1 Set Room ID, PAN ID and RF Channel in INNCOM E528.4G and E527.4G Thermostats Enter Service Mode Service mode is accessed by executing the following button sequence: 1. Press and hold F/C. 2. Press and release OFF/AUTO. 3. Press and release DISPLAY. 4.
- Page 2 Set PAN ID PAN ID is the Personal Area Network ID of the thermostat. The PAN ID is used in networked systems where the PAN ID of the thermostat must match the PAN ID of the router it is assigned to. Enter service mode and follow the procedure below to set the PAN ID in the thermostat 1.