Switching On The Drive System After Standstill - FAZUA Evation Original Instructions Manual

Hide thumbs Also See for Evation:
Table of Contents
Range/trip planning:
How long or how far you can ride your eBike before you need to recharge
the battery depends on several factors.
These factors include, but are not limited to:
• the set support level;
• the (riding) speed with which you move;
• your gear changing;
• the type of tire and the tire pressure set;
• the chosen route and weather conditions;
• the weight of driver and eBike (total weight);
• the condition and age of the battery
The following therefore applies as a matter of principle:
► Familiarize yourself with your eBike step by step and away from roads
and heavy traffic.
► Test the maximum range of your eBike under various external conditions
before planning longer trips. An exact statement about the range of
your system is neither possible before nor during a trip.
Storage and operating temperatures
► Observe the operating and storage temperatures for the components
of the drive system and for the components of your eBike - especially
for the battery, as it can be damaged by extreme temperatures.

4.4 Switching on the drive system after standstill

Your eBike will come to a standstill as soon as it is switched
off.
• After 15 minutes of standstill, the drive system (not the battery!)
switches off automatically.
The drive system can be turned on again by briefly pressing the
center button on the control panel.
• The battery switches off after 8 hours of standstill (provided no
button/touch sensor is pressed during this time).
• After 3 hours of standstill (provided that the charge level of the
battery falls below 30 % and no button/touch sensor is pressed
during this time), the battery switches off.
24
Chapter "Usage"
Table of Contents
loading

Table of Contents