Related Manuals for Ferm HDM1030P
Summary of Contents for Ferm HDM1030P
- Page 3 STOP...
-
Page 4: Safety Warnings
Rotary Hammer drill 850W Wear safety gloves. HDM1030P Thank you for buying this FERM product. By Do not dispose of the product in doing so you now have an excellent product, unsuitable containers. delivered by one of Europe’s leading suppliers. -
Page 5: Machine Information
Mains plug replacement (UK only) Technical specifications HDM1030P If the moulded 3-pin plug attached to the unit is Mains voltage 230-240 V ~ damaged and needs replacing, it is important Mains frequency 50 Hz that it is correctly destroyed and replaced by... - Page 6 Lock-on button • Loosen the handgrip by turning it anticlockwise. Fig. A • Rotate the handgrip to the desired position. • Lock the On/Off switch (2) by pressing the On/ • Retighten the handgrip in the new position by Off switch (2) and then pressing the lock-on turning it clockwise.
-
Page 7: Maintenance
WARRANTY Drilling and hammer drilling (function A and B) • For large holes, for instance in very hard concrete, start using a smaller bit for pilot The warranty conditions can be found on the drilling first, then drill to nominal size. separately enclosed warranty card. -
Page 8: Spare Parts List
Spare parts list HDM1030P Description Position 471023 Front sleeve complete 471000 Steel ball 7.125 471001 Chisel lock plate complete 10-12 840709 Needle bearings 0709 471002 Front bearing complete 13-15 843012 Needle bearings 3012 471003 Selector knob complete 17-21 471004 Drive sleeve complete... - Page 9 Exploded view...
- Page 12 1504-24 www.ferm.com ©2015 FERm B.V.