Install And Configure Systems Management Components; First Boot Setup And Configuration - Dell PowerEdge System Management Manual
Vmware esxi software on servers
Hide thumbs
Also See for PowerEdge:
- Troubleshooting manual (122 pages) ,
- User manual (56 pages) ,
- Use manual (44 pages)
Table of Contents
Use Case
Health
Monitoring
Alert Monitoring The event console feature of IT Assistant may be used to monitor
Change
Management
Troubleshooting,
Logging, and
Diagnostics
Remote
Management
NOTE:
Each of these use cases and various operations for these use cases are
explained in detail in "Systems Management Use Cases" on page 11.
Install and Configure Systems Management
Components
First Boot Setup and Configuration
VMware ESXi comes pre-installed on supported Dell PowerEdge servers. For
steps to setup and configure ESXi on PowerEdge server, refer to VMware ESXi
Dell Solutions Guide at support.dell.com. Make sure that the DRAC is
configured as per the steps in the document.
8
Systems Management Guide
Tools Needed
VI Client may be used to monitor the health information of
various hardware components. IT Assistant, DRAC, and the BMU
can also be used for limited health monitoring.
hardware and virtual machine traps generated from ESXi as well
as SNMP Platform Event Traps generated by the BMC.
SBUU may be used to update the BIOS and firmware of the PE
server. SBUU does not support updating of device drivers for ESXi
or virtual machines.
VMware update manager is used to update the ESXi image
which could contain updated device drivers for the system.
The system log and management agent log may be retrieved using
VI Client or may be viewed from the terminal.
The BMC System Event Log (SEL) is available using DRAC, IT
Assistant, or the BMU.
Diagnostics can be performed using Dell offline diagnostics tools.
Dell Remote Access Controller (DRAC) provides lights out
remote management functionality.
Table of Contents
Troubleshooting
