Sony HKC-7080 Installation And Maintenance Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Professional Video Accessories
  5. HKC-7080
  6. Installation and maintenance manual
Sony HKC-7080 Installation And Maintenance Manual

Sony HKC-7080 Installation And Maintenance Manual

Ccd modification unit for sony hdc-700
Hide thumbs
Table of Contents

Quick Links

CCD MODIFICATION UNIT
HKC-7080
INSTALLATION AND MAINTENANCE MANUAL
1st Edition (Revised 1)
Table of Contents
loading

Related Manuals for Sony HKC-7080

Summary of Contents for Sony HKC-7080

  • Page 1 CCD MODIFICATION UNIT HKC-7080 INSTALLATION AND MAINTENANCE MANUAL 1st Edition (Revised 1)
  • Page 2 ! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.

  • Page 3: Table Of Contents

    Manual Structure Purpose of this manual ..................5 (E) Contents ....................... 5 (E) Related manuals ....................6 (E) 1. Installation 1-1. Configuration of HKC-7080 ..............1-1 (E) 1-2. Installation Procedures ................1-1 (E) 1-3. Replacing CCD Unit ................1-1 (E) 1-3-1. Description on CCD Block Number ........1-1 (E) 1-3-2.
  • Page 4 DR-376 ......................6-5 7. Schematic Diagrams Schematic Diagram Index ................7-1 Location of Printed Circuit Boards ............. 7-1 TG-209 ......................7-3 DR-376 ......................7-4 DU-1 ......................7-7 PA-173 ......................7-8 DR-308 ...................... 7-10 CN-1367 ....................7-11 CN-1756 ....................7-12 2 (E) HKC-7080...
  • Page 5 8. Board Layouts Board Layout Index..................8-1 TG-209 ......................8-3 DR-376 ......................8-5 DU-1 ......................8-7 PA-173 ......................8-9 DR-308 ...................... 8-11 CN-1367 ....................8-11 CN-1756 ....................8-11 3 (E) HKC-7080...

  • Page 7: Manual Structure

    Describes the components that constitute the unit and the procedures to install the HKC-7080 in the HD color camera HDC-700. Section 2 Electrical Alignment Describes electrical adjustment necessary after the HKC-7080 is installed in the HDC-700. Section 3 Setup Menu Describes the setup menu for the modified HDC-700.

  • Page 8: Related Manuals

    When servicing the modified camera, see the HKC-7080 installation and maintenance manual and HDC-700 maintenance manual together.

  • Page 9: Installation

    Section 1 Installation The HKC-7080 is the modification unit for the HDC-700. By installing the HKC-7080 in the HDC-700, it can be obtained for the HD signal having 1920 x 1080 effective picture elements. To install proceed as follows. 1-1. Configuration of HKC-7080 Description Q’ty...

  • Page 10: Replacing Ccd Unit

    1. Open the right and left side panels. 2. Loosen the two screws and disconnect the connector. Screws Connector Filter disk unit 3. Disconnect the flexible card wire. Refer to Section 1-3-3 before disconnecting or connecting the flexible card wire. Flexible card wire 1-2 (E) HKC-7080...
  • Page 11 6. Install the HKC-7080 in the reverse order of removal. . Be very careful not to touch the surface of the filter disk unit when installing the HKC-7080. . Be sure to remove the dust protection cover from the HKC-7080 previously.

  • Page 12: Disconnecting/Connecting Flexible Card Wire

    1. Slide portions A in the direction of the arrow and insert the flexible card wire as far as it will go with the conductive surface down. 2. Slide portions A in the reverse direction to lock. Conductive surface 1-4 (E) HKC-7080...

  • Page 13: Modifying Board

    1-4. Modifying Board 1-4-1. Modifying VDA-31 Board Parts Required Prepare the following resistors because they are not supplied with the unit. Description Q’ty Sony Part No. Res, metal chip 15 Z 1-218-648-11 Res, metal chip 18Z 1-218-650-11 Res, metal chip 30 Z...

  • Page 14: Modifying Va-158 Board

    1. Remove the VA-158 board. 2. Solder the jumper wires from the modification board to the positions specified by the figure. 3. Stick the modification board on the VA-158 board with Sony bond as shown in the figure. (Shaded portions) 4.

  • Page 15: Modifying If-569 Board

    Sony Part No. 7-432-912-52 Modification Procedures 1. Remove the IF-569 board. 2. Solder the jumper wire between pin 119 of IC100 and pin 16 of IC36. 3. Stick the jumper wire with Sony bond as shown in the figure. (Shaded portion) IC100 IC36...

  • Page 16: Modifying Sg-226 Board

    Modification Procedures 1. Remove the SG-226 board. 2. Solder the jumper wire between pin 119 of IC65 and pin 36 of IC71. 3. Stick the jumper wire with Sony bond as shown in the figure. (Shaded portion) IC65 TO Pin 36/IC71...

  • Page 17: Electrical Alignment

    Electrical Alignment 2-1-2. Switch Setting of IF-569 Board This section explains adjustment items required after the HKC-7080 is installed. Perform the following adjustments with setup menu. 1. Turn off the power, then remove the IF-569 board. Regarding the setup menu operation, refer to Section 3.

  • Page 18: Va Gain Adjustment

    (Select the file in accordance with the lens attached. If there is no appropriate file, select NO OFFSET, then change the name of lens with MSU.) 10uS Resetting after Adjustment . Return the switches to their previous positions. 2-2 (E) HKC-7080...
  • Page 19 Adjust for B-ch in the same manner. 7. Adjust the white balance. WHITE button/MSU-700 → ON (lit) Lens File Store MSU menu operation: . FILE button → ON (lit) . Touch panel operation [Lens|File] → [Lens|Store] → [Store] 2-3 (E) HKC-7080...

  • Page 20: Black Shading Adjustment

    OHB File Store 1. MSU menu operation: . FILE button → ON (lit) . Touch panel operation [OHB|File] → [OHB|Store] → [Store] 2. When the store operation is complete, the message “OHB File Stored” is displayed. 2-4 (E) HKC-7080...

  • Page 21: Storing The Reference File

    ITEM: ND OFST Store → Disable new reference file. Storing the reference file Perform the following operation with setup menu. MENU: File PAGE: Reference File ITEM: Store File (Press the MENU SELECT switch toward the ENTER to store the reference file.) 2-5 (E) HKC-7080...

  • Page 22: Storing The Operator File

    Perform readjustment according as necessity, then store a new operator file. Storing the operator file Perform the following operation with setup menu. MENU: Operation PAGE: Operator File ITEM: Store (Press the MENU SELECT switch toward the ENTER to store the operator file.) 2-6 (E) HKC-7080...

  • Page 23: Setup Menu

    RET 1 POWER H-POSI V-POSI FILTER LOCAL STORE CURSOR UP TALLY WIDTH HEIGHT B C D CENTER SAFFETY ZONE DISPLAY SCAN MARKER MARKER MENU SELECT 16:9 CALL CANCEL ENTER MENU MENU SELECT switch DISPLAY switch MENU SELECT control 3-1 (E) HKC-7080...
  • Page 24 In this section, an item under “Ver.” in the table shows a ROM version. If any version is given, it shows that the function for the item is added or changed, and the ROM with that version or higher version supports the function. If no version is given, it shows that every ROM version supports the function. 3-2 (E) HKC-7080...
  • Page 25 The lens extender is in use [On], Off Fan: Fan mode is at “Off” (forcibly off) [On], Off 60Hz 60Hz: Field frequency is set at 60 Hz [On], Off Optical Optical: “Optical” showing a photo-receptive condition indicates anything but “GRN” 3-3 (E) HKC-7080...
  • Page 26 Turns on and off the zebra pattern display [70], 90, 70&90 % Selects the zebra pattern [16:9], 4:3, Squeeze VF Scan Selects the VF scan mode Setting screen 16 : 9 4 : 3 Squeeze Setting screen object object object 3-4 (E) HKC-7080...
  • Page 27 Selects a lens file appropriate for a mounted lens from 16 kinds of the lens files Setting CCU output Connector (camera) Input level MIC1 MIC2 MIC1 LINE MIC2 LINE (Unassigned) (Unassigned) MIC2 AES/EBU Setting screen Auto-iris window frame is shown in a shaded pattern 3-5 (E) HKC-7080...
  • Page 28 ENTER to execute Store Throw MENU SELECT Stores the user’s operator file switch to ENTER to execute Preset Throw MENU SELECT Returns the operator file items to their preset values switch to ENTER to execute 3-6 (E) HKC-7080...
  • Page 29 Resets numeric settings on the Gamma page to 0 switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear” indication flashes. Throw MENU SELECT switch to ENTER again to execute; throw to CANCEL to cancel) 3-7 (E) HKC-7080...
  • Page 30 Resets numeric settings on the Detail 1 page to 0 switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear” indication flashes. Throw MENU SELECT switch to ENTER again to execute; throw to CANCEL to cancel) 3-8 (E) HKC-7080...
  • Page 31 Resets numeric settings on the Matrix page to 0 switch to ENTER to execute (When you throw MENU SELECT switch to ENTER, the “Clear” indication flashes. Throw MENU SELECT switch to ENTER again to execute; throw to CANCEL to cancel) 3-9 (E) HKC-7080...
  • Page 32 . Every time MENU SELECT switch is thrown to ENTER, the scene file replaces the current settings . When the scene file is recalled, an asterisk appears next to the number Standard Returns the current amount of paint adjustments and switch setting to their reference values 3-10 (E) HKC-7080...
  • Page 33 CANCEL to cancel) e) When executing the Auto Level, paint data is temporarily cleared and the automatic level adjustment is performed in sequence. After the adjustment is complete, adjustment result is stored as a master setup data. 3-11 (E) HKC-7080...
  • Page 34 Sets a camera ID of up to ten alphanumerics, symbols, and spaces If “RED” is indicated, be sure to clean the optical connector or optical connector cable. If “YEW” is indicated, cleaning them is recommended. For details on how to clean, refer to Section 2-15. 3-12 (E) HKC-7080...
  • Page 35 The standard values are stored at the factory ND OFST Clear Throw MENU SELECT Clears the white offset value for the ND filter switch to ENTER to execute Setting screen Auto-iris window frame is shown in a shaded pattern 3-13 (E) HKC-7080...
  • Page 36 Shifts vertically the location of the center marker on the screen 20 (down) ↔ _20 (up) Center POS Store Throw MENU SELECT Stores the location of the center marker at present in the switch to ENTER to execute selected lens file number 3-14 (E) HKC-7080...
  • Page 37 Check whether the video signals are properly output at pin 6 of IC106, IC206 and IC306 each, or not AU-203 Checks the voltage at +5 V regulated line DAP-5 Checks the audio clocks (13.5 MHz) at pin 43 of IC2 3-15 (E) HKC-7080...
  • Page 38 Turns on and off the function to activate the APR each time the black balance is automatically performed h) Rear tally lamp refers to back tally lamp and VF tally lamp (of HDVF-700). k) Front tally lamp refers to up tally lamp and lens tally lamp. 3-16 (E) HKC-7080...
  • Page 39 VF each other Left: Zoom position is located on the left and focus position is on the right Right: Zoom position is located on the right and focus position is on the left 3-17 (E) HKC-7080...

  • Page 41: Spare Parts

    Spare Parts 4-1. Notes on Repair Parts 1. Standardization of Parts Some repair parts supplied by Sony differ from those used for the unit. These are because of parts common- ality and improvement. Parts list has the present standardized repair parts.

  • Page 42: Exploded View

    A-8321-193-A o MOUNTED CIRCUIT BOARD, DR-308 1-758-270-11 o FILTER UNIT, OPTICS 3-708-912-01 o LEVER, MOUNT 7-621-770-87 s SCREW +B 2.6X5 7-621-773-86 s SCREW +B 2.6X4 7-627-452-38 s SCREW,PRECISION +K 2X5 7-627-556-38 s SCREW +P 2.6X4.0 7-682-903-01 s +PWH 3X5 HKC-7080...

  • Page 43: Electrical Parts List

    1-218-709-11 s METAL, CHIP 5.1K 0.50% 1/16W 1-218-717-11 s METAL, CHIP 11K 0.50% 1/16W 1-218-694-11 s METAL, CHIP 1.2K 0.50% 1/16W 1-218-699-11 s METAL, CHIP 2K 0.50% 1/16W 1-216-864-11 s METAL, CHIP 0 5% 1/16W 1-218-692-11 s METAL, CHIP 1K 0.50% 1/16W HKC-7080...
  • Page 44 1-162-970-11 s CERAMIC, CHIP 0.01uF 10% 25V 8-729-117-16 s TRANSISTOR 2SA1611-M6 1-162-970-11 s CERAMIC, CHIP 0.01uF 10% 25V 8-729-120-21 s TRANSISTOR 2SD1614-T1XL 1-162-970-11 s CERAMIC, CHIP 0.01uF 10% 25V 8-729-143-14 s TRANSISTOR 2SC4176-B35 1-162-970-11 s CERAMIC, CHIP 0.01uF 10% 25V 8-729-143-07 s TRANSISTOR 2SA1610-YY33 HKC-7080...
  • Page 45 1-218-723-91 s METAL, CHIP 20K 0.50% 1/16W 1-218-716-11 s METAL, CHIP 10K 0.50% 1/16W 1-218-723-91 s METAL, CHIP 20K 0.50% 1/16W 1-218-716-11 s METAL, CHIP 10K 0.50% 1/16W 1-218-723-91 s METAL, CHIP 20K 0.50% 1/16W 1-218-716-11 s METAL, CHIP 10K 0.50% 1/16W HKC-7080...
  • Page 46 1-135-149-21 s TANTALUM, CHIP 2.2uF 10% 10V 1-135-149-21 s TANTALUM, CHIP 2.2uF 10% 10V 1-135-149-21 s TANTALUM, CHIP 2.2uF 10% 10V 1-135-149-21 s TANTALUM, CHIP 2.2uF 10% 10V 1-135-149-21 s TANTALUM, CHIP 2.2uF 10% 10V 1-135-149-21 s TANTALUM, CHIP 2.2uF 10% 10V HKC-7080...
  • Page 47 1-218-661-11 s METAL, CHIP 51 0.50% 1/16W 1-568-361-21 s CONNECTOR, BOARD TO BOARD 24P 1-218-661-11 s METAL, CHIP 51 0.50% 1/16W 1-218-661-11 s METAL, CHIP 51 0.50% 1/16W 1-569-607-21 o CONNECTOR, BOARD TO BOARD 24P 1-218-699-11 s METAL, CHIP 2K 0.50% 1/16W HKC-7080...
  • Page 48 1-218-737-11 s METAL, CHIP 75K 0.50% 1/16W R132 1-218-740-11 s METAL, CHIP 100K 0.50% 1/16W 1-218-737-11 s METAL, CHIP 75K 0.50% 1/16W R133 1-216-789-11 s METAL, CHIP 2.2 5% 1/16W 1-218-737-11 s METAL, CHIP 75K 0.50% 1/16W R134 1-216-789-11 s METAL, CHIP 2.2 5% 1/16W HKC-7080...
  • Page 49 1-241-833-11 s RES, ADJ, METAL 10K RV204 1-241-833-11 s RES, ADJ, METAL 10K RV301 1-241-828-21 s RES, ADJ, METAL 500 RV302 1-241-833-11 s RES, ADJ, METAL 10K RV303 1-241-833-11 s RES, ADJ, METAL 10K RV304 1-241-833-11 s RES, ADJ, METAL 10K HKC-7080...
  • Page 50 1-216-864-11 s METAL, CHIP 0 5% 1/16W 1-415-890-11 s DELAY LINE 8-759-173-16 s IC TL062CPW 8-759-166-02 s IC UPC814G2 8-759-195-81 s IC TC7S86FU 8-759-195-81 s IC TC7S86FU 8-759-185-42 s IC LM4040AIM3-2.5 8-759-565-12 s IC CXD9086R 8-759-271-86 s IC TC7SH04FU 8-759-196-96 s IC TC7SH08FU-TE85R 4-10 HKC-7080...
  • Page 51 TC74HC4053AFT(EL) ..5-9 TC7S00FU(TE85R) ..5-9 TC7S04F(TE85R) ..... 5-9 TC7S04FU(TE85R) ..5-9 TC7S08FU(TE85R) ..5-9 TC7S32FU(TE85R) ..5-10 TC7S86FU ......5-10 TC7S86FU(TE85R) ..5-10 TC7SH00FU-TE85R ..5-9 TC7SH04FU ..... 5-9 TC7SH04FU-TE85R ..5-9 TC7SH08FU-TE85R ..5-9 TC7W08FU .....5-10 TC7W08FU(TE12R) ..5-10 HKC-7080...
  • Page 52 —TOP VIEW— —TOP VIEW— —TOP VIEW— MA3J142E0LSO 2SB1114-T1ZL DTC114EUA-T106 2SB1115-T1YL (R1, R2=10 K) 2SB1115A-YQ 2SB1121-ST —TOP VIEW— —TOP VIEW— MA3J14300LSO 2SC4176-B35 2SC4176-T1B35 2SC4177-L6 2SC4177-T1L7 —TOP VIEW— —TOP VIEW— 2SD1614-T1XL MA728 MA728-TX —TOP VIEW— —TOP VIEW— MA8120-L 2SK508-K51 MA8120-L-TX 2SK508-T1K51 HKC-7080...
  • Page 53 AT27C512R-15JC (ATMEL) CXA1583M (SONY) C-MOS 512 K (65,536 x 8) UV-EPROM SAMPLE AND HOLD FOR CCD —TOP VIEW— —TOP VIEW— INPUTS CLPP : CLAMP PULSE SHI COMP CPI COMP : CLAMP BIAS IN1, IN2 : VIDEO 27 A14 (MSB) SHI COMP...
  • Page 54 CXD1260N (SONY) CXD1281M (SONY) C-MOS CCD CLOCK DRIVER HORIZONTAL CLOCK DRIVER FOR CCD —TOP VIEW— —TOP VIEW— NC GND XVH1 XVH1 XVH2 XVH2 XHHG XSMG XHHG XSMG INPUTS : OUTPUT CONTROL INVERT : OUTPUT CONTROL INVERT : OUTPUT CONTROL INVERT...
  • Page 55 HN58C66FP-25 (HITACHI) CXD9069Q (SONY) HN58C66SFP25TZ VERTICAL CLOCK DRIVER FOR CCD —TOP VIEW— C-MOS 64 K (8192 x 8)-BIT EEPROM —TOP VIEW— INPUTS TEST : TEST TERMINAL (STANDARD: _9 V) VH1 - VH4 : VH POWER (STANDARD: +15 V) I/O 0...
  • Page 56 32 k BYTE CONTROLLER INTERRUPT CONTROLLER DATA TRANSFER CONTROLLER EXTAL SERIAL 8-BIT XTAL COMMUNICATION TIMER INTERFACE STBY 16-BIT FREE PWM TIMER RUNNING TIMER (x 3 CHANNEL) (x 3 CHANNEL) 10-BIT WATCHDOG A/D CONVERTER TIMER PORT 9 PORT 8 PORT 7 HKC-7080...
  • Page 57 COLUMN BUFFER I/O4 DECODER I/O3 I/O2 I/O1 : LOW LEVEL : HIGH LEVEL BUFFER MC74ACT125MEL (MOTOROLA) C-MOS BUS BUFFER GATES WITH 3-STATE OUTPUT —TOP VIEW— HI-Z : LOW LEVEL : HIGH LEVEL : DON’T CARE HI-Z : HIGH IMPEDANCE HKC-7080...
  • Page 58 LOGIC OSCILLATOR INTERRUPT LP FILTER LOGIC PCF8574 PCF8574A AIN0 ANALOGUE AIN1 MULTI- SUCCESSIVE AIN2 COMPA- PLEXER APPROXIMATION INPUT C BUS RATOR AIN3 REGISTER/LOGIC FILTER CONTROL SHIFT 8 BIT REGISTER PORTS VREF write pulse AOUT read pulse AGND POWER-ON RESET HKC-7080...
  • Page 59 : HIGH LEVEL : LOW LEVEL : HIGH LEVEL : DON’T CARE TC7S08FU(TE85R) (TOSHIBA) TC7SH08FU-TE85R (TOSHIBA) C-MOS 2-INPUT AND GATE —TOP VIEW— Y = A • B = A + B GND 3 0 : LOW LEVEL 1 : HIGH LEVEL HKC-7080...
  • Page 60 DUAL OPERATIONAL AMPLIFIERS (DUAL-SUPPLY TYPE) —TOP VIEW— X24C02S-3.0-C7000 (XICOR)(2K-BIT) X24C02S-T1 C-MOS SERIAL EEPROM —TOP VIEW— INPUT A0 - A2 : ADDRESS : SERIAL CLOCK : WRITE CONTROL INPUT/OUTPUT : SERIAL DATA NOTE : TYPE PIN 7 NM24C16 X24C02 X24C04 TEST 5-10 HKC-7080...

  • Page 61: Block Diagrams

    Section 6 Block Diagrams Block Diagram Index CCD Block (HKC-7080) ........6-2 DR-376 ............... 6-5 DU-1 ..............6-3 PA-173 ..............6-3 TG-209 ..............6-4 HKC-7080...

  • Page 62: Ccd Block

    R-PA OUT DOUBLE SAMPLING DU-1 TG-209 TIMING GEN. CAM BLKG CN-1756 DR-376 RP-108 V/H DRIVER V DRIVER ND CONT TIMING CC CONT GEN. ND POSI ND POSI CC POSI CC POSI CCD Block CN-1367 HKC-7080 HDC700A-CCD BLOCK OVERALL BLOCK/M HKC-7080...

  • Page 63: Pa-173

    OPB PLS OUT VD OUT MB-570, 9-18 (HDC-750A) CAM BLKG IN PRE BLK MB-666, 12-A6 (HDC-700A) R-TEMP+, G-TEMP+, B-TEMP+ R-TEMP+, G-TEMP+, B-TEMP+ 22-20 22-20 R-TEMP_, G-TEMP_, B-TEMP_ R-TEMP_, G-TEMP_, B-TEMP_ 18, 19, 17 18, 19, 17 PA-173 DU-1 HKC-7080 HDC700A-PA173-BLOCK/M HKC-7080...

  • Page 64: Tg-209

    +3.3 V +3.3 V REF. V REG. Q7, 8 _37M OUT _5.5 V 37N/XST2 DR, 5-11 DR, 5-4 _5.5 V _5.5 V _5.5 V SLOW SCAN ON OPB PLS DR, 5-7 VL IN VL OUT DR, 5-3 TG-209 HKC-7080 HDC700A-TG209-BLOCK/M HKC-7080...

  • Page 65: Dr-376

    TG, 1-17, 19 17, 19 34, 36 CN-1674, 1-34, 36 (HDC-750A), CN-1756, 1-34, 36 (HDC-700A) XRG IN TG, 1-21 CN-1674, 1-38 (HDC-750A), CN-1756, 1-38 (HDC-700A) XLH1 IN XLH1 TG, 1-23 CN-1674, 1-40 (HDC-750A), CN-1756, 1-40 (HDC-700A) DR-376 HKC-7080 HDC700A-DR376BLOCK/M HKC-7080...

  • Page 67: Schematic Diagrams

    Schematic Diagrams Schematic Diagram Index CN-1367 ............. 7-11 CN-1756 ............. 7-12 DR-308 ............... 7-10 DR-376 ............... 7-4 DU-1 ..............7-7 PA-173 ..............7-8 TG-209 ..............7-3 Location of Printed Circuit Boards HKC-7080 TG-209 RP-108 DR-376 DU-1 CN-1756 CN-1367 DR-308 NR-66 PA-173...

  • Page 69: Tg-209

    NOT PRINT MANUAL MPX1 MPX2 IC10 TC7SH08FU-TE85R 3.3V 12NS NOT PRINT MANUAL 6.3V 560p 560p 0.01 IC2(1/2) LM4040AIM3-2.5 µPC814G2 2SB1114-T1ZL 3.3V 2SC4176-T1B35 2SC4176-T1B35 2.4k 0.01 6.3V +37M IC2(2/2) µPC814G2 TG-209 7.5k 2SA1610-T1Y34 BOARD NO. 1-672-414-11 2SC4176-T1B35 2SA1610-T1Y34 LOT NO. 808- B-¥HDC750A-TG209-12 HKC-7080...

  • Page 70: Dr-376

    R56 100 R61 10k R V COMP IC5(2/2) R62 10k 2SC4176-T1B35 µPC814G2 G V COMP 4700 R63 10k B V COMP IC4(2/2) :KMG 100k µPC814G2 5.6k 8.2k R103 IC1(2/2) 5.6k TL062CPW-E05 -10.5V DTC114EUA-T106 -5.5V 2SA1611-T1M7 2SA1610-T1Y34 2SD1614-T1XL 2SD1614-T1XL DTC114EUA-T106 HKC-7080...
  • Page 71 H CLK R-IM02 R-IM2 RP CLK XSUB RP CLK R-SUB 2.2k 100k R-SUB 5.1k 220p +5.5V +5.5V +5.5V R-IM04 MA3J14300LSO R-IM4 -5.5V -5.5V VL OUT 2SC4176-T1B35 2SB1115-T1YL 2SC4177-T1L7 R-IM03 R-IM3 2SA1610-T1Y34 2SK620-TX DR-376 BOARD NO. 1-672-417-12 LOT NO. 808- B-¥HDC750A-DR376-12@ HKC-7080...

  • Page 73: Du-1

    100k R MPX-2P R411 100k IC403(2/4) MC74ACT08MEL IC403(3/4) MC74ACT08MEL IC403(4/4) MC74ACT08MEL R412 100k L404 IC404(3/4) IC404(4/4) MC74ACT125MEL MC74ACT125MEL C407 IC404(1/4) R415 MC74ACT125MEL R413 R416 1/16W DU-1 R417 BOARD NO. 1-660-225-12 IC404(2/4) LOT NO. 808- MC74ACT125MEL R414 B-¥HDC750-DU1-12 1/16W R418 HKC-7080...

  • Page 74: Pa-173

    R9 51 G-PA GND R V COMP IN OPEN G V COMP IN 1.2k B V COMP IN 6.3V 0.01 R-PA OUT C301 R-PA GND IC4(3/4) 5.6k TL064CPW-E05 -5.5V 560k 0.022 2SA1611-T1M7 2SD1614-T1XL IC3(3/3) TC74HC4053AFT(EL OPEN 100k 100k IC4(4/4) TL064CPW-E05 HKC-7080...
  • Page 75 180k 100p R158 RV302 10 4V :TA 330k R119 C205 R159 DL309 DL311 R160 MA728-TX R161 IC14 CXA1879Q R105 R114 R162 IC11 TC74ACT08F 2SC4176-T1B35 CLC505AJE-T RV303 R163 R120 R164 6.3V 2SA1610-T1Y34 PA-173 BOARD NO. 1-660-224-13 LOT NO. 808- B-¥HDC750-PA173-13 HKC-7080...

  • Page 76: Dr-308

    R-PA IN G-PA OUT B-PA GND G-PA GND B-PA OUT G-PA IN VD IN CAM BLKG IN B-PA GND B-PA IN +5V OUT -5V OUT VD OUT CAM BLKG OUT DR-308 BOARD NO. 1-660-265-11 LOT NO. 808- B-¥HDC700-DR308-11 HKC-7080 7-10 7-10...

  • Page 77: Cn-1367

    CC CONT 2 OUT CC CONT 1 OUT CC CONT 0 OUT AUX6 CN-1367 ND POSI IN BOARD NO. 1-660-262-11 ND CONT 2 OUT ND CONT 1 OUT LOT NO. 808- ND CONT 0 OUT B-¥HDC700-CN1367-11 AUX7 HKC-7080 7-11 7-11...

  • Page 78: Cn-1756

    G-ST8 R-ST8 5.1k +15V R-ST7 XLH1 +15V 0.01 R-ST6 IC2(2/2) µPC814G2 2SB1114-T1ZL 2SC4177-T1L7 +15V R-ST5 R-ST4 R-ST3 VDDLH VDDH12 R-ST2 +15V R-ST1 R-IM1 6.2k 1.2k R-IM2 R-SUB R-IM4 R-IM3 CN-1756 BOARD NO. 1-672-412-11 LOT NO. 808- B-¥HDC700A-CN1756-12@ HKC-7080 7-12 7-12...

  • Page 79: Board Layout Index

    Section 8 Board Layouts Board Layout Index CN-1367 ............. 8-11 CN-1756 ............. 8-11 DR-308 ............... 8-11 DR-376 ............... 8-5 DU-1 ..............8-7 PA-173 ..............8-9 TG-209 ..............8-3 HKC-7080...

  • Page 81: Tg-209

    * D1 * C2 * D3 * C2 * C2 * D2 * D2 * C2 * C3 * C2 * D1 * D5 * C5 * B2 * D1 * E1 * C3 * A5 * D3 * A4 HKC-7080...

  • Page 83: Dr-376

    * A2 * C5 * B7 * B1 * A1 * B7 * B1 * C4 * D1 * E1 * D1 * C3 * A7 * D8 * B8 * E8 * E8 * E8 * B6 * B6 HKC-7080...

  • Page 85: Du-1

    DU-1 DU-1 DU-1 DU-1 -A SIDE- -B SIDE- SUFFIX : -12 SUFFIX : -12 HKC-7080...

  • Page 87: Pa-173

    * A4 * C3 * F1 * A4 * C3 * H1 RV101 * A4 * C3 RV102 * B4 * H1 RV103 * B4 * H3 RV104 * D1 * H3 RV201 * G5 * G3 * F1 RV202 HKC-7080...

  • Page 89: Dr-308

    —————————————————————— * A1 * A1 * A1 * A1 * A1 * A1 * A1 * A1 * A1 * A1 * A1 *:B SIDE CN-1756 CN-1756 -A SIDE- -B SIDE- SUFFIX : -11 SUFFIX : -11 8-11 8-11 HKC-7080...
  • Page 91 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any...
  • Page 92 Printed in Japan Sony Corporation 1999. 8 08 HKC-7080 (UCJ) J, E Broadcasting & Professional Systems Company ©1999 3-201-958-02...

Table of Contents