Sunrise Medical User User Manual
Sunrise Medical User User Manual

Sunrise Medical User User Manual

Sunrise telephone user manual

Quick Links

User Manual
sunrise surf & talk
verbindungen einrichten
sunrise surf & talk
Table of Contents
loading

Summary of Contents for Sunrise Medical User

  • Page 1 User Manual sunrise surf & talk verbindungen einrichten sunrise surf & talk...
  • Page 2 sunrise surf & talk Welcome! sunrise surf & talk: surf the Internet, send and receive e-mails- and make phone calls also without a fi xed network connection. It’s the new way of communicating. Suitable for anyone who wants to make calls and have cheap access to the Internet without a fi...
  • Page 3 sunrise surf & talk Flexible confi guration The administrative interface is the central coordinating point from which to confi gure your sunrise surf & talk box. To access the administrative interface, all you need is a browser on your computer. It is not necessary to install any additional software.
  • Page 4: Table Of Contents

    sunrise surf & talk Table of Contents. Your sunrise surf & talk box. Safety instructions Included in delivery LCD display Control options and connections Instructions for use First Steps. Setting up connections. Setting up a WLAN connection Setting up a LAN connection Basics of administration.
  • Page 5 sunrise surf & talk Security settings in detail. Basic fi rewall protection Additional protection through encryption Pro settings. Changing a static IP address Confi guring the DHCP server Confi guring dynamic DNS Confi guring port forwarding Selecting a WLAN channel Adjusting the WLAN output power Diagnostic tools.
  • Page 6: Your Sunrise Surf & Talk Box

    sunrise surf & talk Your sunrise surf & talk box. Safety instructions. To avoid hurting yourself or doing damage to the electronic device, please keep the following tips in mind when installing and using the sunrise surf & talk box. •...
  • Page 7: Lcd Display

    sunrise surf & talk LCD display. 1. Barometer – shows the current weather situation: sunny, overcast and rainy 2. Current time – displayed in 24-hour format 3. Current date in the format: DD.MM.YYYY 4. Status indicator for the local network connection to the computer: WLAN or LAN 5.
  • Page 8: Instructions For Use

    sunrise surf & talk Reset button The reset button is located in the small hole on the left of the telephone jack, when looking at the sunrise surf & talk box from above. Depending upon how long you press the reset button, you can initiate the following actions: •...
  • Page 9 sunrise surf & talk Administration interface The administration interface of the sunrise surf & talk box can be accessed either through the log-in link on the CD ROM, or with an Internet browser. The browser has to support JavaScript and CSS (e.g., Microsoft Internet Explorer version 5.5 or higher, or Mozilla Firefox).
  • Page 10: First Steps

    sunrise surf & talk First steps. Set up the sunrise surf & talk box at a suitable location, one that meets the following criteria: • The site should be dry and free of dust, and must not be exposed to direct sunlight. •...
  • Page 11 sunrise surf & talk Step 3 – Connect to power supply. Be sure to use the original sunrise surf & talk box power cord. Other power cords may damage or destroy the de- vice. If other power cords are used, sunrise does not assume responsibility for damages. First insert the small con- nector in the upper round slot in the sunrise surf &...
  • Page 12 sunrise surf & talk Step 5 – Register the network with Windows. You can fi nd more detailed information in the chapter «Setting up connections», p. 14. Note: The fi rst steps for Mac OS users are not described in this manual. Mac OS users should consult their Apple manual, or contact Apple directly.
  • Page 13 sunrise surf & talk SSID The SSID (Service Set Identifi er) is a network identifi cation code used by the device in a wireless network. You can choose this code on your computer, in order to connect with the device. SSID transmissions Normally, the device sends out its SSID to client computers to show availability.
  • Page 14: Setting Up Connections

    sunrise surf & talk Setting up connections. You can connect your PC/laptop to the sunrise surf & talk box using WLAN (wireless) or with a network cable. In this section you will fi nd the following directions: • Microsoft Windows XP: Setting up WLAN connection on page 14 •...
  • Page 15 sunrise surf & talk Step 1 – Confi gure WLAN connection. 1. Start your PC/laptop. 2. Click on the START button in the taskbar of your PC and choose Settings > Network Connections. The Network Connections dialogue is opened. 3. Right click on Wireless Network Connection and select Properties in the context menu. The Wireless Network Connection Properties dialogue is opened.
  • Page 16 sunrise surf & talk Step 3 – Deactivate proxy server If you use a proxy server for access to the Internet, deactivate it. Note: As an example, the following describes the procedure for Microsoft Internet Explorer. If you use a different browser, please read the appropriate user documentation.
  • Page 17 sunrise surf & talk Step 5 – Confi gure encryption for your computer 1. Click on the START button of the taskbar of your computer and select Settings > Network Connections. The Network Connections dialogue is opened. 2. Right-click on Wireless Network Connection and select Properties from the context menu.
  • Page 18 sunrise surf & talk Microsoft Windows 2000: Setting up a WLAN connection. In order to be able to use a WLAN connection between your PC/Laptop and the sunrise surf & talk box, the follow- ing steps are required: 1. Confi gure a WLAN connection 2.
  • Page 19 sunrise surf & talk 7. Highlight «sunrise surf & talk box» in the Profi le area and click on the Connect button. You will be asked, if necessary, to restart your computer. Step 3 – Deactivate proxy server 1. Make sure that on the General tab the box for Internet Protocol (TCP/IP) is checked. 2.
  • Page 20 sunrise surf & talk Step 5 – Confi gure coding for your PC/laptop 1. Double-click on the D-Link AirPremier symbol in the taskbar of your computer. The D-Link AirPremier AG Utility dialogue is opened. 2. Click on the Environment Overview menu. 3.
  • Page 21: Setting Up A Lan Connection

    sunrise surf & talk Setting up a LAN connection. In order to establish a LAN connection between your PC/laptop and the sunrise surf & talk box, you fi rst have to connect them with a network cable (Ethernet cable). Depending on how you would like to connect your computer with the sunrise surf &...
  • Page 22 sunrise surf & talk 5. On the General tab, click on the Obtain an IP address automatically option fi eld and then click on the OK button. 6. In the Local Area Connection Properties dialogue, click on the Close button. You will be asked, if necessary, to restart your computer.
  • Page 23 sunrise surf & talk Microsoft Windows 2000: Setting up a LAN connection. In order to be able to use a LAN connection between your PC/laptop and the sunrise surf & talk box, the following steps are required: 1. Connect network cable 2.
  • Page 24 sunrise surf & talk 5. Deactivate the following box: • Automatically detect settings • Use a proxy server for your LAN. 6. In order to save this confi guration, click on the OK button. 7. Close the Internet Options dialogue by clicking on the OK button. Now you can continue with Step 6 –...
  • Page 25: Basics Of Administration

    sunrise surf & talk Basics of Administration. The sunrise surf & talk box is confi gured and administered in the administration interface. No installation is required on your PC/laptop in order to be able to work with the administration interface. You only need a browser. Logging in and Logging out.
  • Page 26: Changing Your Password

    sunrise surf & talk Changing your password. The sunrise surf & talk box is delivered from the factory with the standard password «admin» for access to the ad- ministration interface. In order to prevent any unauthorized access to the device, you should change this password. For security reasons, it is also to be recommended that you change the password at regular intervals.
  • Page 27: Unlocking The Sim Card For Sunrise Surf & Talk

    sunrise surf & talk 5. Click on the OK button. The PIN is securely stored in the sunrise surf & talk box. You have to enter the PIN again after the following ac- tions: • The SIM card inserted for sunrise surf & talk was exchanged. •...
  • Page 28: Confi Guring Automatic Disconnection

    sunrise surf & talk This is how you synchronize the time and date with the help of NTP 1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25). 2. Click on the Time tab in the Tools menu. 3.
  • Page 29: Confi Guring Your Apn (Access Point Name)

    sunrise surf & talk Confi guring the APN (Access Point Name) You have access to the Internet via the APN of the sunrise surf & talk box. You can freely confi gure the APN. This is how you confi gure the APN 1.
  • Page 30: Restarting The Sunrise Surf & Talk Box

    sunrise surf & talk Restarting the sunrise surf & talk box. This is how you restart the sunrise surf & talk box 1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25). 2.
  • Page 31: Switching The Sim Card For Sunrise Surf & Talk

    sunrise surf & talk Switching the SIM card for sunrise surf & talk. Step 1 – Removing the old SIM card for sunrise surf & talk 1. If necessary, disconnect the Internet connection (i.e. the connection to the mobile broadband network from sunrise).
  • Page 32: Conducting The Self-Test

    sunrise surf & talk Conducting the self-test. The sunrise surf & talk box will conduct a self-test, if desired. This test checks the major hardware and software components of the device. If problems are found, they are then described in the administration interface. This is how you conduct the self-test of the sunrise surf &...
  • Page 33: Telephone

    sunrise surf & talk Phoning. The SIM card for sunrise surf & talk For the telephone functions, the sunrise surf & talk box requires the use of a sunrise surf & talk SIM card. If you wish to use the telephone functions, you must fi rst activate the SIM card by entering your PIN. The PIN will be stored in the sunrise surf &...
  • Page 34: Using The Telephone

    sunrise surf & talk Changing the PIN for the sunrise surf & talk SIM card Note: The PIN for the sunrise surf & talk SIM card can be changed only through the administrative interface of your sunrise surf & talk box. 1.
  • Page 35 sunrise surf & talk Call Forwarding. You can have all of your calls forwarded automatically to another line of your choice, either immediately (CF-un- conditional), after 20 seconds (CF-20), if your line is busy (CF-busy), or if your sunrise surf & talk box is turned off (CF-unit off).
  • Page 36 sunrise surf & talk Deactivating call forwarding 1. Lift the telephone handset and wait for the dial tone. 2. Enter the key sequence for the call forwarding setting you wish to delete. Call forwarding type CF-unconditional CF-20 CF-busy CF-unit off deactivate all CF 3.
  • Page 37 sunrise surf & talk Terminating the original call 1. You hear the call waiting tone during a call. 2. If you wish to accept the incoming call, you have 30 seconds in which to terminate the fi rst call by replacing the handset.
  • Page 38 sunrise surf & talk Selectively terminating a call 1. Press the key and wait for the dial tone. 2. Press the key. The active connection is terminated. Note: To remind you of a connection that is still active, a ring signal will sound after you replace the handset (up to three times, for a maximum of 15 seconds).
  • Page 39 sunrise surf & talk Interconnecting 1. Press the key and wait for the dial tone. 2. Press the key. All parties are now connected. Terminating You can terminate the conference by replacing the handset. Caller identifi cation. Incoming calls You can see the caller‘s number on the sunrise surf & talk box display. This feature works only if display of the call- er’s number has not been blocked by the caller.
  • Page 40: Managing Sms Messages

    sunrise surf & talk Managing SMS messages. The sunrise surf & talk box contains an SMS management interface that enables you to: • get an overview of the SMS messages that you have sent and received • use an editor form to send SMS messages •...
  • Page 41 sunrise surf & talk You can also write an SMS directly to a person listed in your number directory. Select the desired contact person by the appropriate radio button and press the «Send SMS» button. The tel- ephone number will be transferred automatically into the »Number» form fi eld on the «Write SMS» tab. Note: It is possible to transmit an SMS to more than one address, but a comma or semicolon must be inserted between the individual telephone numbers.
  • Page 42: Security Settings In Detail

    sunrise surf & talk Security settings in detail. Basic fi rewall protection. Note: These basic security settings do not guarantee the security of the connection between the sunrise surf & talk box and your PC or laptop. This is true especially if you are using a WLAN connection (see Additional protection through encryption, p.
  • Page 43: Additional Protection Through Encryption

    sunrise surf & talk To restrict outgoing services: 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out p.25). 2. Select the Firewall tab in the Security menu. 3. Next to Services, enable the Allow following outgoing services option. 4.
  • Page 44 sunrise surf & talk 5. Click the Generate Key button. Your pass phrase will be converted to hexadecimal form. The length of the key generated will vary according to the level of security. • WEP 64: 10 characters • WEP 128: 26 characters 6.
  • Page 45 sunrise surf & talk Changing the SSID The SSID (Service Set Identifi er) is the sunrise surf & talk box’s WLAN network identifi er. The SSID set by the manufacturer is “sunrise surf & talk box”. You should change the SSID in order to prevent confusion with other sunrise surf & talk boxes in your vicinity, which may be using the same SSID.
  • Page 46 sunrise surf & talk Using address fi lters to control access Every PC or laptop connected to the sunrise surf & talk box via a WLAN or LAN has a globally unique MAC (Media Access Control) address. This address is assigned by the device‘s manufacturer. You can control which devices have access to your sunrise surf &...
  • Page 47: Pro Settings

    sunrise surf & talk Pro settings. This section and the confi guration options it describes are intended for network administrators. Changing a static IP address. You can change the static IP address of the sunrise surf & talk box, which is used for access over a LAN or WLAN. The manufacturer has set the IP address to 192.168.0.1.
  • Page 48: Confi Guring Dynamic Dns

    sunrise surf & talk 3. Enter the desired IP addresses in the IP Address Range fi elds. 4. Click the OK button. The connection to the sunrise surf & talk box’s administrative interface will be interrupted. 5. Reenter the IP address in your browser’s address fi eld. How to assign static IP addresses through the DHCP server 1.
  • Page 49: Confi Guring Port Forwarding

    sunrise surf & talk How to confi gure dynamic DNS 1. Log in to the sunrise surf & talk box’s administrative interface (see Logging in and logging out, p. 25). 2. Select the DynDNS tab in the Tools menu. 3. Enter your data in the Domain Name, Login and Password fi elds. 4.
  • Page 50: Adjusting The Wlan Output Power

    sunrise surf & talk 5. To leave the administrative interface, close your browser. Adjusting the WLAN output power. By adjusting the WLAN output power, you can change the range of your WLAN network. How to adjust the WLAN output power 1.
  • Page 51: Diagnostic Tools

    sunrise surf & talk Diagnostic Tools Diagnostic Tools. The sunrise surf & talk box includes a number of diagnostic tools you can use to check the status of the device and the Internet connection. Status of the sunrise surf & talk box. Here’s how to check the status of the sunrise surf &...
  • Page 52: Ping Diagnosis

    sunrise surf & talk Diagnostic Tools Ping diagnosis. You can use ping diagnosis to determine whether your sunrise surf & talk box is connected to the Internet. Here’s how to do a ping test: 1. Log on to the administration user interface of the sunrise surf & talk box (see Logging in and logging out, p. 25). 2.
  • Page 53: Troubleshooting - Administration Interface

    sunrise surf & talk Troubleshooting – Administration interface. The measures listed in this section may help if you have problems accessing the administration interface of the sunrise surf & talk box. Note: The following procedures apply to Microsoft Windows XP (Service Pack 2). If you use a different opera- ting system, please consult the user documentation provided by the manufacturer.
  • Page 54 sunrise surf & talk Activate JavaScript in your browser: 1. Start Microsoft Internet Explorer. 2. Select Tools > Internet Options. The Internet Options menu will open up. 3. Select the Security settings tab. 4. Click on the Internet symbol and then on the button Custom level. 5.
  • Page 55 sunrise surf & talk Check that the WLAN card is correctly installed in your computer: 1. Click on the START button in the Windows task bar, and select the option Settings > Control Panel. The Control Panel. menu will open up. 2.
  • Page 56: Glossary

    sunrise surf & talk Glossary Glossary. 802.11g 802.11g is a standard for the wireless transmission of data with a data transfer speed of 54 mbit/s. The standard 802.11g is compatible with the standard 802.11b. DHCP Server DHCP is the abbreviation for Dynamic Host Confi guration Protocol. The DHCP server sets an IP address range in which IP addresses can be assigned for attached devices (so-called DHCP clients).
  • Page 57 sunrise surf & talk Glossary LAN is an abbreviation for Local Area Network. A LAN is a small network of computers connected to the Internet. MAC address MAC is an abbreviation for Media Access Control. MAC addresses are unique and unchangeable addresses for network cards (i.e., LAN or WLAN cards), assigned by the manufacturer.
  • Page 58: Specifi Cations/Technical Data

    sunrise surf & talk Specifi cations / Technical data. Range of applications • Complete solution for the private sphere, ideal for households without DSL service • In the business world for VPN-secured access to email and intranets – for entire teams, even during travel. •...
  • Page 59 sunrise surf & talk Specifi cations / Technical data Data rates HSDPA: up to 1.8 Mbit/s UMTS: up to 384 Kbit/s EDGE: up to 200 Kbit/s GPRS: up to 53,6 Kbit/s WLAN: up to 54 Mbit/s (802.11b/g) Security WLAN: WEP 64/128, WPA 1+2, 802.11x/EAP, MAC access control lists Router: Firewall, stateful packet inspection, NAT, port forwarding System: automatic self-diagnosis (watchdog), factory default fallback for hardware and software reset Telephone...
  • Page 60 sunrise surf & talk Specifi cations / Technical data Short Message Service (SMS) Sending/receiving/forwarding/address book via a browser or with a software client Operating environment Operating temperature: 0 to 40 degrees Celsius Humidity: 10% to 70% System requirements Ethernet 10/100 BaseT port or 802.11b/g WLAN Browser TCP/IP protocol stack Housing Dimensions: 18,5 x 4,9 x 10 cm...

This manual is also suitable for:

Surf & talk

Table of Contents