HP ProCurve Radio Port 230 Installation And Getting Started Manual
Hide thumbs
Also See for ProCurve Radio Port 230:
- Installation manual (24 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Related Manuals for HP ProCurve Radio Port 230
Summary of Contents for HP ProCurve Radio Port 230
- Page 1 Installation and Getting Started Guide ProCurve Radio Port 230/210 www.procurve.com...
- Page 2 Packard. performance, or use of this material. The only warranties for HP products and services are set Publication Number 5991-8629 forth in the express warranty statements accompanying such products and services. Nothing herein should be September 2007 construed as constituting an additional warranty.
-
Page 3: Table Of Contents
Introduction ProCurve Radio Port 230 and 210 Package Contents ... . 1-1 Description ........... 1-2 Technical Specifications . - Page 4 HP Customer Service ........
-
Page 5: Introduction
Introduction The ProCurve Radio Port 230 and ProCurve Radio Port 210, components of the ProCurve Wireless LAN System, link wireless IEEE 802.11a/b/g devices to the Ethernet network through a wireless services-enabled switch. Wireless services-enabled switches include: ■ ProCurve Switch 5300xl Series with a ProCurve Wireless Edge Services xl Module ■... -
Page 6: Description
Introduction Description Description The ProCurve Radio Port 230 is a dual-radio IEEE 802.11-compliant device supporting simultaneous IEEE 802.11a and b/g wireless Ethernet connections. It contains two embedded IEEE 802.11 b/g (2.4 GHz) omni directional diversity antennas, and two embedded IEEE 802.11a (5.4 GHz) omni directional diver- sity antennas. -
Page 7: Features
Introduction Features Features ■ High-performance IEEE 802.11-compliant radios ■ Embedded omni directional diversity antennas Integrated 10/100Base-TX RJ-45 port ■ ■ Two LEDs Safety wire tie point ■ ■ Lap-style lock port ■ Slots for wall mounting Clips for mounting on a suspended ceiling T-Bar ■... -
Page 8: Radio Characteristics
Radio Characteristics Radio Characteristics The ProCurve Radio Port 230 comprises two IEEE 802.11 radios: (1) an IEEE 802.11 b/g radio operating in the 2.41 to 2.8 GHz band and (2) an IEEE 802.11a radio operating in the 5.15 to 5.88 GHz band. The ProCurve Radio Port 210 has a single IEEE 802.11b/g radio. -
Page 9: Leds
Introduction LEDs LEDs Each radio port has LEDs on the front of the case that display the device status. The LEDs display connection status and error conditions, as well as network activity for the individual radios in the radio port. LEDs Radio Port 230 LEDs The Radio Port 230 has two LEDs displaying connection status, error... -
Page 10: Normal Operation
Introduction LEDs Normal Operation: Once the radio port establishes a connection to a compatible wireless services-enabled switch, the radio port begins normal operation. During normal operation, the GREEN LED indicates the status of the IEEE 802.11 b/g radio, and the AMBER LED indicates status of the IEEE 802.11a radio. •... -
Page 11: Installation Instructions
Installation Instructions The ProCurve Radio Port 230 and 210 can be mounted either on a wall or on a suspended ceiling T-bar. The radio ports are not designed for mounting on a desk. The diagrams on the next page note the key installation features. -
Page 12: Safety Wire Tie Point
Installation Instructions Lock Port Safety Wire Tie Point RJ-45 Port... -
Page 13: Wall Mount
The ProCurve Radio Port 230 or 210 can be mounted onto any wood, plaster, or cement wall surface using the provided wall anchors when necessary. The illustration shows the radio port mounted horizontally. -
Page 14: Wall Mount Procedure
Installation Instructions Wall Mount Wall Mount Procedure Lightly mark a vertical line on the wall at the location where the midline of the radio port is to be located. Use the alignment arrows, move the edge of the radio port to the midline from step 1 and mark the two points on the midline for the location of the mounting screws. -
Page 15: Safety Wire Tie Point
Installation Instructions Wall Mount Lock Port Safety Wire Tie Point RJ-45 Port Plug the Ethernet cable to the RJ-45 port and connect the opposite end of the cable to a switch with an IEEE 802.3af compatible power source. The Ethernet cable can be tucked inside the cable recess on the underside of the radio port case for a completely clean installation. -
Page 16: Rj45 Wiring Options
Installation Instructions Wall Mount RJ45 Wiring Options The RJ-45 cable may be routed in multiple ways. Cable exits Cable exits RJ-45 cable connection (tucked in recess and routed through wall or tile) Cable recess... -
Page 17: Suspended Ceiling Tile T-Bar Mount
Installation Instructions Suspended Ceiling Tile T-Bar Mount Suspended Ceiling Tile T-Bar Mount Mounting the Radio Port 230 or 210 to a suspended ceiling T-Bar grid consists of attaching the radio port to the underside of a T-Bar in a suspended ceiling grid, and twisting the radio port to lock the case onto the T-Bar. -
Page 18: To Remove The Radio Port From The T-Bar
Installation Instructions Suspended Ceiling Tile T-Bar Mount Ceiling View: Install into T-Bar Suspension Clip (slide the radio port into the sus- pension clip, then rotate radio port clockwise and the T-Bar Suspension click locks)) T-Bar Suspension Clip (first secure) To install, turn radio port counter-clockwise T-Bar Retaining Clip T-Bar Suspension Clip... -
Page 19: Troubleshooting Radio Port Installation
Troubleshooting Radio Port Installation This section describes how to troubleshoot the installation of your ProCurve radio port primarily from a hardware perspective. You can perform more in- depth troubleshooting of your wireless LAN system from the console or Web UI on your wireless services-enabled ProCurve switch. For more information on software configuration or troubleshooting, see the Getting Started Guide for your ProCurve Wireless Edge Services Module for details. -
Page 20: Startup Error Checklist
Troubleshooting Radio Port Installation Startup Error Checklist Startup Error Checklist Startup errors occur when the radio port is unable to communicate with a compatible wireless services-enabled switch, or when the radio port success- fully communicates to a compatible switch but the switch is not able to adopt and manage the radio port. -
Page 21: Hp Customer Service
All ProCurve devices are labeled in compliance with the location rules and regulations of each purchased unit. Any changes or modifications to ProCurve Equipment, not expressly approved by HP, could void the user’s authority to operate this device. This device is used only with supported switches that have a ProCurve Wireless Edge Services Module installed, or other compatible wireless services-enabled switch. -
Page 22: Before Calling Support
Troubleshooting Radio Port Installation Startup Error Checklist Before Calling Support To make the support process most efficient, before calling your networking dealer or HP Support, you first should retrieve the following information Information Item Information Location • radio port identification •... -
Page 23: Safety And Regulatory Statements
For regulatory identification purposes, this product has been assigned a Regulatory Model Number (RMN). The RMN for your product is RSVLC-0502. The RMN should not be confused with the marketing name (ProCurve Radio Port 210, ProCurve Radio Port 230) or the Product Number (J9004A, J9006A). -
Page 24: Regulatory Statements
Safety and Regulatory Statements Regulatory Statements Regulatory Statements Notice for U.S.A. Manufacturer's FCC Declaration of Conformity Statement Tested to Co mply w ith FC C S ta ndards Product No: J9004A, J9006A FCC ID No: B94RSVLC-0502, B94RSVLC-0505 Regulatory Model No: RSVLC-0502 Manufacturer:: Hewlett-Packard Company... -
Page 25: Notice For European Community
European standards (European Norms) that are listed on the EU Declaration of Conformity that has been issued by HP for this device. Countries of Operation & Conditions of Use This device may be used in the following EU and EFTA countries: Austria,... - Page 26 Safety and Regulatory Statements Regulatory Statements ■ E'necessaria una concessione ministeriale anche per l'uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze. "In France, this device may use the entire 2400 - 2483.5 MHz band (Chan- ■...
-
Page 27: Operation Using 5 Ghz Channels In The European Community
Safety and Regulatory Statements Regulatory Statements Operation Using 5 GHz Channels in the European Community The user must ensure operation of this device is in conformance with European National spectrum usage laws as shown below and elsewhere in this document. Frequency Band Allowed Channels Usage... -
Page 28: Eu Declaration Of Conformity
Hewlett-Packard Company Manufacturer's Address: 8000 Foothills Blvd. Roseville, CA 95747-5502 U.S.A. declares, that the product Product Name: HP Procurve Radio Port 210, 220, 230 Product Number(s): J9004A, J9005A, J9006A Regulatory Model: RSVLC-0502 (J9004A, J9006A), RSVLC-0505 (J9005A) Product Options: J8441A, J8444A, J8448A, J8997A, J8998A, J8999A, J9000A... -
Page 29: Notice For Japan
Safety and Regulatory Statements Regulatory Statements Notice For Japan... -
Page 30: Notice For Taiwan
Safety and Regulatory Statements Regulatory Statements Notice For Taiwan DGT LPD (Low Power devices) Statement... -
Page 31: Recycle Statements
Recycle Statements Waste Electrical and Electronic Equipment (WEEE) Statements Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. -
Page 32: Statements
Recycle Statements Waste Electrical and Electronic Equipment (WEEE) Statements Laitteiden hävittäminen kotitalouksissa Euroopan unionin alueella Jos tuotteessa tai sen pakkauksessa on tämä merkki, tuotetta ei saa hävittää kotitalousjätteiden mukana. Tällöin hävitettävä laite on toimitettava sähkölaitteiden ja elektronisten laitteiden kierrätyspisteeseen. Hävitettävien laitteiden erillinen käsittely ja kierrätys auttavat säästämään luonnonvaroja ja varmistamaan, että... - Page 33 Recycle Statements Waste Electrical and Electronic Equipment (WEEE) Statements Smaltimento delle apparecchiature da parte di privati nel territorio dell'Unione Europea Questo simbolo presente sul prodotto o sulla sua confezione indica che il prodotto non può essere smaltito insieme ai rifiuti domestici. È responsabilità dell'utente smaltire le apparecchiature consegnan- dole presso un punto di raccolta designato al riciclo e allo smaltimento di apparecchiature elettriche ed elettroniche.
- Page 34 Para obter mais informações sobre locais que reciclam esse tipo de material, entre em contato com o escritório da HP em sua cidade, com o serviço de coleta de lixo ou com a loja em que o produto foi adquirido.
- Page 36 Technical information in this document is subject to change without notice. © Copyright 2006-2007 Hewlett-Packard Development Company, L.P. Reproduction, adaptation, or translation without prior written permission is prohibited except as allowed under the copyright laws. September 2007 Manual Part Number 5991-8629...