Connecting Cables; Installing The Dome Cover - Motorola Avigilon H5A Series Installation Manual

Refer to the diagrams in

 1. If external input or output devices are part of the installation (for example: door contacts, relays, etc.),

connect the devices to the I/O connector block.

 2. If an external microphone needs to be connected to the camera, connect the device to the camera

A/V connector.

For more information, see

 3. (2.0 megapixel models only) If an external video monitor needs to be connected to the camera,

connect the device to the camera A/V connector.

For more information, see

 4. Connect a network cable to the Ethernet port (RJ-45 connector).

The Link LED indicator will turn on once a network link has been established.

 5. Connect power using one of the following methods:

 

Power over Ethernet (PoE) Class 3 — If PoE is available, the LEDs will turn on.

o

 

External Power — Connect an external 12 V DC or 24 V AC power source to the power

o

connector block.

 6. Check that the Connection Status LED indicator indicates the correct state. For more information, see

Connection Status LED Indicator on

Note:

Before installing the dome cover, we recommend that you first connect to the camera and adjust the

aim, zoom, and focus so that the camera covers the required field of view. For more information, see:

 

Connecting to the Camera on page 49

l

 

Aiming the Dome Camera on page 50

l

 

Zooming and Focusing the Dome Camera on page 50

l

Be careful not to touch or scratch the dome bubble. Any marks or fingerprints on the dome bubble will

cause unwanted reflections in the -IR model.

Connecting Cables

Overview on page 1

for the location of the different connectors.

Connecting to Microphones, Speakers, and Video Monitors on

Connecting to Microphones, Speakers, and Video Monitors on

page 55.

page 53.

page 53.

47