Idis FM1300 Installation Manual

FM1300 INSTALLATION MANUAL

Mounting

1

Assemble the camera body to the bracket by

tightening the screws.

• DC-D2233WHX / DC-D3233WRX / DC-

D3233RX / DC-D3233X Models:

Screw No. 5 (3-point), PCB Support 8.8mm

• DC-D2233R / DC-D2233 Models:

Screw No. 4 (2-point), PCB Support 20.4mm

• DC-D2233WHR / DC-D2233WR / DC-

D2233W Models:

Screw No. 3 (3-point), PCB Support 23.1mm

• Other Plastic Dome Models: Screw No. 2

(3-point), No PCB support necessary

• Other Vandal Dome Models: Screw No. 1

(3-point), No PCB support necessary

2

Connect the cable through the cable hole

and screw the safety wire to the bracket to

prevent the bracket from falling on to the

floor.

This manual is intended for the users of the FM1300 ceiling mounting bracket.

It includes the instructions for mounting the FM1300 ceiling mounting bracket

to the ceiling.

• This bracket is intended to be used with some models of dome

cameras. Ask your retailer for details on a specific model and do

not use it with other models of cameras.

• This installation should be performed by a qualified service

personnel in conformance to all local codes.

• You may need to reinforce the ceiling. If the ceiling is not strong

enough to support the camera, the camera may fall.

• Do not use this product for other purposes.

< Screw No. >

(DC-D2233R Model)

1

5

4

3

3

2

1

2

5

4

2

5

3

1

Cable

Safety Wire