Overview Of Remote Control Buttons - Sony KP-44PX2U Instruction Manual

@£

1

@™

2

@¡

3

@º

4

5

!ª

6

!•

7

!¶

8

!§

9

!º

!∞

!¡

!¢

!™

!£

!¡

from the TV screen.

!™

Press these buttons to select the next or previous broadcast channel.

!£

For more details refer to chapter "NexTView" on page 19.

!¢

Press these buttons to adjust the volume of the TV.

!∞

If Media Selector is switched to VCR, press this button to record programmes.

!§

Press this button to switch off PIP, teletext or video input.

!¶

!•

!ª

@º

Press this button to freeze the picture. The screen is divided into two screens. On the left with the normal

picture, on the right the picture is freezed. Press this button again to return to the normal picture.

@¡

Whilst you are in "PIP" mode, press this button to swap the two screens.

@™

to cancel. To select the source you want to watch, refer to the chapter "PIP Input" on page 14.

@£

Press this button to mute TV sound. Press again to restore the sound.

Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details,

please refer to the chapter "Teletext" on page 18.

1

Press this button to temporarily switch off TV (the standby indicator

again to switch on TV from standby mode.

To save energy we recommend switching off completely when TV is not in use.

After 15 minutes without a signal and without any button being pressed, the TV switches

automatically into standby mode.

2

3

With this remote control you can operate not only this TV but also the main functions of your VCR

or DVD. Switch on the device you want to operate and next press this button repeatedly to select

the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.

Before the first time you want to control a DVD or VCR by using this remote control, you have

to set it up depending on the brand of the device to be used. For more details, refer to the

chapter "Remote Control Configuration for VCR or DVD" on page 23.

4

source appears on the TV screen.

5

If Media Selector is switched to TV or VCR, press this button to select channels.

For double-digit programme numbers, enter the second digit within 2.5 seconds.

6

Press this button to watch the last channel selected (the last channel watched for at least 5

seconds).

For Sony's VCR double-digit programme numbers, e.g. 23, press -/- - first and then the buttons

2 and 3.

7

more details refer to the chapter "Auto Format" on page 13.

8 This button only works in Teletext mode.

9

!º

• When MENU is switched on, use these buttons to operate the menu system. For details refer

to "Introducing and Using the Menu System" on page 10.

• When MENU is switched off, press OK to show a channel overview. Then press

select the channel and then press again the OK button to watch the selected channel.

Using these buttons you can control the main functions of your VCR or DVD.

Press this button to display the menu on the TV screen. Press again to remove the menu display

Press this button repeatedly to change the picture mode.

Press this button repeatedly to change the sound effect.

Press this button to display all on-screen indications. Press again to cancel.

Press this button to watch another source in a small picture (PIP) within the main TV picture. Press again

Press this button to switch your VCR or DVD on or off.

Press this button repeatedly until the desired input symbol of the

Press this button repeatedly to change the format of the screen. For

Press this button to switch on teletext.

on the TV lights up). Press

GB

or

to

5

Overview