Table of Contents
Available languages
Available languages
12
Tap V next to [ch] below [Adhoc], and select a channel.
Make sure to select the same channel for both your CLIÉ
handheld and the other communication device. Select a channel
from 1 to 11.
13
Tap [Advanced Setup] in the bottom right-hand corner
of the screen.
14
Tap the [Auto] check box in [IP Address]. The check
mark disappears.
The IP address input screen appears.
Note
Ad-hoc mode may not be established if "Auto" is selected.
Auto IP is only possible when a PC has DHCP and shares an Internet
connection. Most of the time, the user has to enter a static IP on the CLIÉ
handheld for the Ad-hoc mode.
Continued on next page
US
27
Chapters
Table of Contents
