Table of Contents
s
CM1N9223en_01
2014-04-04
DESIGO™ PX
System controllers
for the integration of third-party devices and systems in Desigo
• Integration platforms and system controllers for third-party devices and
systems via KNX, Modbus, M-Bus and other protocols into the automation
level via BACnet
• System controllers for the integration of Desigo RXB/RXL room controllers
• Native BACnet devices with communication via BACnet/LonTalk or
BACnet/IP
• BTL label (BACnet communications passed the BTL test)
• Comprehensive management and system functions (alarm management,
time scheduling, trends, remote management, access protection etc.)
• Supports operation via local or network-compatible operator units PXM...
9
PXC001.D
PXC001-E.D
PXA40-RS...
Building Technologies
223
Table of Contents
Related Manuals for Siemens DESIGO PX Series
Summary of Contents for Siemens DESIGO PX Series
- Page 1 DESIGO™ PX PXC001.D System controllers PXC001-E.D PXA40-RS... for the integration of third-party devices and systems in Desigo • Integration platforms and system controllers for third-party devices and systems via KNX, Modbus, M-Bus and other protocols into the automation level via BACnet •...
- Page 2 PXA40-… option modules can be plugged and unplugged when the automation "hot-pluggable" station is operating. • The functionality is available immediately after inserting. • The functionality disappears approx.1 minute after unplugging. 2 / 10 Siemens PXC001 System controllers CM1N9223en_01 Building Technologies 2014-04-04...
- Page 3 Plug-in screw terminal block (KNX) RJ45 interface (ETS tool for service use) KNX programming pin RJ45 interface for operator unit or PX KNX tool Slider for mounting on DIN rail PXA40-RS... 3 / 10 Siemens PXC001 System controllers CM1N9223en_01 Building Technologies 2014-04-04...
- Page 4 5 Hz 5 Hz Service pin Identification of the system controller in the IP network or L network ORKS See "Commissioning". Engineering See the PX open documents in folder CM110761. 4 / 10 Siemens PXC001 System controllers CM1N9223en_01 Building Technologies 2014-04-04...
- Page 5 – which would not be the case when restart erasing by pressing the reset key). For details see the Firmware Download Tool User's guide, CM110626. Restart Press the Reset button to force a restart 5 / 10 Siemens PXC001 System controllers CM1N9223en_01 Building Technologies 2014-04-04...
- Page 6 Lithium batteries: May catch fire, explode or leak. Do not short circuit, charge, disassemble, dispose of in fire, heat above 100°C, or expose to water. Disposal: Seal battery terminals with tape. 6 / 10 Siemens PXC001 System controllers CM1N9223en_01 Building Technologies...
- Page 7 1 or 2 (depending on software) Parity None, even or odd (depending on software) Flow control Xon/Xoff, hardware or none (depending on software) Cable type 9-core standard screened cable Cable length Max. 3 m 7 / 10 Siemens PXC001 System controllers CM1N9223en_01 Building Technologies 2014-04-04...
- Page 8 Zertifikat AMEV: Supports profiles AS-A and AS-B to BACnet 2011, V1.1 AMEV directive "BACnet in public buildings" http://database.ul.com/ Document download www.hqs.sbt.siemens.com/gip/general/dlc/dl c_mobile_direct.asp?BPZ:PXC001 Environmental compatibility The product environmental declaration ISO 14001 (Environment) CM1E9223 contains data on ISO 9001 (Quality) environmentally compatible product design...
- Page 9 7 – Rx 8 Screen, connected to functional earth KNX plug Plug-in screw terminal block 9 10 9 (CE–) – KNX data cable 10 (CE+) + KNX data cable 9 / 10 Siemens PXC001 System controllers CM1N9223en_01 Building Technologies 2014-04-04...
- Page 10 Dimensions All dimensions in mm 50.2 271.5 38.5 50.8 10 / 10 2014 Siemens Switzerland Ltd Subject to change Siemens PXC001 System controllers CM1N9223en_01 Building Technologies 2014-04-04...