Table of Contents
L8124A,B,C,E,G,L,M AQUASTAT® RELAYS
KNOB SET AT 180°F (82°C)
SETTING STOP
SETTING
STOP ARM
PROJECTION "A"
1
SCALE MARKINGS IN FAHRENHEIT ONLY.
Fig. 23. Setting stop in position to limit
the high limit setting to 200°F (93°C).
Heat Anticipator
The thermostat heat anticipator should be set at 0.2A.
CHECKOUT
Put the system into operation and observe each function
through at least one complete cycle. Be sure the control
operates as intended.
60-2061—10
1
M2844
14
Material Safety Data Sheet (MSDS) for heat-conductive
compound, which is included with TRADELINE Aquastat
Relay models.
MATERIAL SAFETY DATA SHEET
(MSDS)
SECTION 1. PRODUCT AND
COMPANY IDENTIFICATION.
Product Name: Heat conductive compound.
MSDS ID: DS9021.
Synonyms: MS1699.
Product Use: Heat conductive material used to enhance
contact and heat transfer in temperature sensor applications.
Manufacturer: Honeywell Inc., 1985 Douglas Drive North,
Minneapolis, MN 55422.
Date Released: October 8, 1999.
NFPA Ratings:
Health 0; Flammability 1; Reactivity 0;
Personal Protection B.
- Quick Links:
- Table of Contents
- General
- Installation
- Wiring
- Setting and Checkout
- Operation
Hide quick links:
Table of Contents
