Table of Contents
5-48.
100 HOURS AFTER EACH INSTALLATION
DATA REFERENCE
Chapter 71
Chapter 53
Chapter 63
ECCN EAR99
SPECIAL INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
POWER PLANT
1.
Torque check engine mount attachment hardware at
engine and airframe attachment points.
2.
If fastener is improperly torqued:
a. Check nuts tare torque, and bolt threads and shanks for
damage.
b. Check engine mounts and supporting structure for
damage.
c. Install new fastener if required, and apply torque.
Recheck torque at next 100 hours.
TAILBOOM
Torque check tailboom attachment nuts 375 to 415 inch-pounds
(42.4 to 46.8 Nm).
TRANSMISSION
1.
Replace oil filter element and oil. Inspect removed element
for metal particles. If particles are found, investigate to
determine cause.
BHT-206L4-MM-1
MECH
25 FEB 2011 Rev. 13
INITIAL
OTHER
5-00-00
Page 137
Hide quick links:
Chapters
Table of Contents
