Related Manuals for Epson EP-4004
Summary of Contents for Epson EP-4004
- Page 1 EPSON Programming Guide 6 Color EPSON Ink Jet Printer EP-4004 Artisan 1430 Stylus Photo 1430W/1500W (Level I) 2013/Feb/08 Revision: 1 Page: 1...
- Page 2 No part of this publication may be reproduced, stored in any retrieval system, or transmitted in any form or by any means without the prior written permission of SEIKO EPSON Corporation for any purpose other than the authorized users. No patent liability is assumed with respect to the use of the information contained within. While every precaution has been taken in the preparation of this information, SEIKO EPSON Corporation and its affiliates assume no responsibility for errors or omissions.
-
Page 3: Table Of Contents
CHAPTER 1 : INTRODUCTION ..............................5 1.1. Features ....................................5 CHAPTER 2 : PAPER TYPES AND SIZES MEDIA SPECIFICATION ..................6 2.1. Paper Sizes for the EP-4004/Artisan 1430/Stylus Photo 1430W/1500W................6 2.2. Paper Size and Orientation ..............................9 2.3. Printable Area..................................11 2.3.1. - Page 4 7.10. Job name Information ..............................72 CHAPTER 8 : DEVICE ID ................................73 Tables Table 1 The EPSON EP-4004/Artisan 1430/Stylus Photo 1430W/1500W Printers Feature Summary ......5 Table 2 Coordinate Systems for a Single Sheet of Paper....................12 Table 3 Printable Area Dimensions (Zero margin/ Borderless)..................
-
Page 5: Chapter 1 : Introduction
With the EP-4004/Artisan 1430/Stylus Photo 1430W/1500W’ s b i -d i r e c t i o n a l i n t e r f a c e s a n d E P S O N ’... -
Page 6: Chapter 2 : Paper Types And Sizes Media Specification
CHAPTER 2 : PAPER TYPES AND SIZES Media Specification In addition to the standard plain paper and envelope sizes, EPSON provides special paper types in the following sizes: 2.1. Paper Sizes for the EP-4004/Artisan 1430/Stylus Photo 1430W/1500W Y: quality guarantee, △: guarantee with conditions... - Page 7 Standard Borderless Paper Type Size KG 4x6 (10x15) 写真用紙＜絹目調＞ A3+ / Super A3 Premium Photo Paper Semi-Gloss(U.S.A) Letter Premium Semigloss Photo Paper(Other) 2L 5x7 (13x18) KG 4x6 (10x15) ハガキ Postcard フォトマット紙 A3+ / Super A3 Premium Presentation Paper Matte(U.S.A) 11x14 Matte Paper Heavy-weight(Other) Letter 8x10...
- Page 8 Standard Borderless Paper Type Size ハガキ Postcard フォトシール フリーカット ハガキ Postcard CD/DVD レーベル φ12cm φ8cm CD/DVD 高画質 CD/DVD φ12cm CD/DVD Premium Surface φ8cm * No support for CD/DVD glossy surface media. * A CD media’ s Minimum inner diameters is 18mm. (standards:43mm) * The user definition sizes other than a general plain paper are assumed to be non support (form not guaranteed).
-
Page 9: Paper Size And Orientation
2.2. Paper Size and Orientation Support Orientation U.S.A. Euro Asia/ Japan Paper Type Dimensions W x L A3+ / US SuperB 329mm x 483mm 297mm×420mm 420mm x 594mm US B (Ledger) 279mm x 432mm US C 17in x 22in 364mm x 515mm 257 mm x 364 mm Legal... - Page 10 89 to 241.3 mm x 89 to 1117.6 User-defined／ユーザ定義 mm(3.5 in. to 9.5 in. x 3.5 in. (Borden) to 44 in.) Each of the predetermined sizes is inserted only in the orientation indicated by "Yes" in the above table. Printing at a rotation of 90 for each of the predetermined sizes must be carried out by the application. *1):Photo Paper 4in.x6in.
-
Page 11: Printable Area
2.3. Printable Area For the purpose of printing, a sheet of paper is divided into two regions: the printable area and the non-printable area. These areas are defined as follows. The printable area is the region within which the printing position can be set, and is the portion which is surrounded by the left margin position, the right margin position, the top margin position, and the bottom margin position. -
Page 12: Table 2 Coordinate Systems For A Single Sheet Of Paper
Table 2 Coordinate Systems for a Single Sheet of Paper Right margin position Origin of the page management coordinate system Paper Non-printable area Top margin position Top margin Non-printable area Origin of the position Printable area management coordinate system Top margin position Printable area Left margin position Bottom margin position... -
Page 13: Printing Area (Standard)
2.3.1. Printing Area (Standard) EP-4004/Artisan 1430/Stylus Photo 1430W/1500W The printable areas of various paper sizes on the EPSON printer is defined hereafter. Values are expressed in dot units, where 1 dot = 1/360 inch. As is displayed in the following diagram, printable area can be... - Page 14 Standard Sizes The printing area is specified by A, B, D, and E. A/A(Centered) B/B(Centered) D/D(Centered) E/E(Centered) Legal 42/42 2976/2976 42/42 4800/4956 Letter 42/42 2976/2976 42/42 3720/3876 42/42 2892/2892 42/42 3969/4125 42/42 2014/2014 42/42 2736/2892 42/42 1404/1404 42/42 1858/2014 42/42 4125/4125 42/42 5628/5869...
-
Page 15: Printing Area (Zero Margin / Borderless)
2.3.2. Printing Area (Zero margin / Borderless) The printable areas of various paper sizes on the EP-4004/Artisan 1430/Stylus Photo 1430W/1500W printer is defined hereafter. Values are expressed in dot units, where 1 dot = 1/360 inch. As is displayed in the following diagram, printable area can be defined as follows: A = the width of the left override area B ’... -
Page 16: Enable Paper Size Of Zero Margin Printing
2.4. Enable paper size of zero margin printing Paper Type Dimensions W x L U.S.A. Euro/Asia Japan A3+ / Super A3 / B 329mm x 483mm 297mm×420mm 11x14in 11in x 14 in. Letter 8.5in. x 11in. 210 mm x 297 mm Yotsugiri / 10x17in 254 mm x 305 mm US B... -
Page 17: Printing Area (Cd-R)
2.5. Printing Area (CD-R) The printable area of CD-R is as below. The inside of Φ116 and the outside of Φ21 is printable area. The method of setting the printable are as follows. (1) The standard of horizontal direction is the 72mm position far from the center of CD-R. (Center of CD-R is found automatically.) (2) The standard of vertical direction is the 67.5mm position far from the center of CD-R. -
Page 18: Chapter 3 : Printing Option
CHAPTER 3 : Printing Option 3.1. Printing Quality The EPSON EP-4004/Artisan 1430/Stylus Photo 1430W/1500W has the capability of printing at eleven different levels of quality. Print density Raster command ESC ( D ESC ( D ESC (e ESC i setting... -
Page 19: Recommended Settings For Color And Monochrome Printing
Preset name Print Quality Resolution [dpi] 普通紙 ドラフト Economy 360 x 180 & 標準 Normal 720 x 360 きれい Fine 720 x 720 EPSON 写真用紙 & 標準 Photo 720 x 720 きれい Super Photo 5760 x 1440 EPSON 写真用紙クリスピア & 標準 Photo 720 x 720 きれい... -
Page 20: Recommended Setting Mode For Driver (Color & Black)
3.2.2. Recommended Setting Mode for Driver (Color & Black)Media Preset name Print Quality Resolution [dpi] Plain Paper Default Economy 360 x 180 Text Normal 720 x 360 Photo Fine Fine 720 x 720 Ultra Premium Photo paper Glossy Draft Photo 720 x 720... -
Page 21: Recommended Setting Modes (Color & Black)
3.2.3. Recommended Setting Modes (Color & Black)Media Preset name Print Quality Resolution [dpi] Plain Paper Speed Normal 720 x 360 Quality Fine 720 x 720 Ultra Premium Photo paper Glossy Speed Photo 720 x 720 Ultra Glossy Photo Paper Quality Photo RPM 5760 x 1440... -
Page 22: Chapter 4 : Command Sequence
CHAPTER 4 : COMMAND SEQUENCE 4.1. Raster Graphics Modes The following three modes are available for raster graphics commands: 1) Non-compressed mode - the print data is transferred without being compressed. Effective for printing data with a low compression ratio, such as photographs. 2) Run-length encoded mode - the print data is transmitted after run-length encoding compression. -
Page 23: Command Transfer Procedure
4.2. Command Transfer Procedure 4.2.1. Command transfer sequence for non-compressed and the run-length encoded compression modes The following are the basic commands used in non-compressed and run-length encoded modes. The commands are listed in the order as they are sent: Table 5 Command Sequence for the Conventional command method of graphics data transmission Transfer cycle Details of setting... -
Page 24: Table 6 Command Sequence For The Newer Method Of Esc
Table 6 Command Sequence for the newer Method of ESC (D command method of graphics data transmission Transfer cycle Details of setting Items set Commands used By document 1. Initialize settings 1.1 Exit Packet Mode ESC SOH @EJL… Enter remote mode ESC (R Set Printer Timer TI **... -
Page 25: Limitations Of Command Settings
4.3. Limitations of Command Settings “ E x i t P a c k e t Mo d e ” , i n m a n y c i r c u m s t a n c e s , c o m m a n d MU S T b e c a l l e d b e f o r e a n y c o m m u n i c a t i o n o r p r i n t i n g c a n o c c u r on any I/F. -
Page 26: Chapter 5 : Individual Command Specifications
EPSON proprietary. [Initial State] The initial state of the printer, unused and unopened, new from the EPSON box, may or may not be in packet mode. However, once the printer has received any print job from any other source (especially a Windows OS printer driver) it will most likely be in packet mode. -
Page 27: Initialize Printer Esc
5.1.2. Initialize printer ESC @ ESC @ Ver 1.00 [Name] Initialize printer [Setting] [Format] 1BH, 40H [Range of Definition] [Function] The various settings are returned to their initial values. The Y axis origin of the page management coordinate system and the position management coordinate system are set to the current printing position on the Y axis. -
Page 28: Line Feed Lf
5.1.3. Line feed LF Ver. 1.00 [Name] Line feed [Operation] [Format] [Range of Definition] [Function] Advances the current printing position in the positive Y direction by an amount equal to the current line separation amount. Sets the printing position in the X direction to the starting point (the left margin position) on the X axis of the position management coordinate system. -
Page 29: Form Feed Ff
5.1.4. Form feed FF Ver 1.00 [Name] Form feed [Operation] [Format] [Range of Definition] [Function] The contents of the print buffer are printed, the current page is ejected, the position management coordinate system is set to the next page, and the printing position is set to the origin of the position management coordinate system for the new page. -
Page 30: Carriage Return Cr
5.1.5. Carriage Return CR Ver 1.00 [Name] Carriage Return [Operation] [Format] [Range of Definition] [Function] The printing position in the X direction is set to the origin (the left margin) on the X axis of the position management coordinate system. [Initial State] [Related Commands] [Setting] Commands whose settings are affected by this command. -
Page 31: Control Paper Loading/Ejecting Esc Em N
5.1.6. Control paper loading/ejecting ESC EM n ESC EM n Ver 1.00 [Name] Control paper loading/ejecting [Setting] [Format] 1BH, 19H, n [Range of Definition] n=52H (="R") [Function] The CSF (cut sheet feeder) receives the following commands, according to the value of n=31H select bin 1for the next paper feeding, and for every paper fed thereafter n=43H cut the specified cut line and return to the loading position ( roll paper only) n=52H eject paper... -
Page 32: Set Absolute Horizontal Print Position Esc
5.1.7. Set absolute horizontal print position ESC ( $ nL nH m1 m2 m3 m4 ESC ( $ nL nH m1 m2 m3 m4 Ver 1.00 [Name] Set absolute horizontal print position [Operation] [Format] 1BH, 28H, 24H, nL, nH, m1, m2, m3, m4 [Range of Definition] nL=04H, nH=00H 0 <= ( m4 * 1000000H + m3 * 10000H + m2 * 100H + m1 ) * 5760 <= 323.991 mm... -
Page 33: Set Page Length In Defined Unit (Extended) Esc
5.1.8. Set page length in defined unit (extended) ESC (C nL nH m1 m2 m3 m4 ESC (C nL nH m1 m2 m3 m4 Ver 2.00 [Name] Set page length in defined unit(extended) [Operation] [Format] 1BH, 28H, 43H, nL, nH, m1, m2, m3, m4 [Range of Definition] nL=04H, nH=00H 0<=(m4*1000000H+m3*10000H+m2*100H+m1) *1440/(defined value) <=1FFFFFFFH... -
Page 34: Set Unit (Extended) Esc
5.1.9. Set unit (extended) ESC (U nL nH P V H mL mH ESC (U nL nH P V H mL mH Ver 2.00 [Name] Set unit(extended) [Setting] [Format] 1BH, 28H, 55H, nL, nH, P, V, H, mL mH [Range of Definition] nL=05H, nH=00H P=( mH*256 + mL ) = 180, 360, 720, 1440, 2880 V=( mH*256 + mL ) = 180, 360, 720, 1440, 2880, 5760... -
Page 35: Set Absolute Vertical Print Position (Extended) Esc
5.1.10. Set absolute vertical print position (extended) ESC (V nL nH m1 m2 m3 m4 ESC (V nL nH m1 m2 m3 m4 Ver 2.00 [Name] Set absolute vertical print position(extended) [Operation] [Format] 1BH, 28H, 56H, nL, nH, m1, m2, m3, m4 [Range of Definition] nL=04H, nH=00H (Vertical position set) = (mL + mH x 256) x (units set) -
Page 36: Set Page Format (Extended) Esc
5.1.11. Set page format (extended) ESC (c nL nH t1 t2 t3 t4 b1 b2 b3 b4 ESC (c nL nH t1 t2 t3 t4 b1 b2 b3 b4 Ver 2.00 [Name] Set page format(extended) [Setting] [Format] 1BH, 28H, 63H, nL, nH, t1, t2, t3, t4, b1, b2, b3, b4 [Range of Definition] nL=08H, nH =00H 0Page 37: Monochrome Mode / Color Mode Selection Esc
5.1.12. Monochrome Mode / Color Mode Selection ESC ( K nL nH m n ESC ( K nL nH m n Ver 1.00 [Name] Monochrome Mode / Color Mode Selection [setting] [Format] 1BH, 28H, 4BH, nL, nH, m, n [Range of Definition] nL=02H, nH=00H m=00H n=00H, 01H, 02H...Page 38: Selects Dot Size Esc
5.1.13. Selects dot size ESC (e nL nH m d ESC (e nL nH m d Ver 1.00 [Name] Selects dot size [Setting] [Format] 1BH, 28H, 65H, nL, nH, m, d [Range of Definition] nL=02H, nH=00H m=00H, d=00H, 10H, 21H, 25H, 33H, 34H [Function] The dot size is set according to the value of d.Page 39: Set Relative Vertical Print Position (Extended) Esc
5.1.14. Set relative vertical print position (extended) ESC (v nL nH m1 m2 m3 m4 ESC (v nL nH m1 m2 m3 m4 Ver 2.00 [Name] Set relative vertical print position(extended) [Setting] [Format] 1BH, 28H, 76H, nL, nH, m1, m2, m3, m4 [Range of Definition] nL=04H, nH=00H 0 <= (m4*1000000H +m3*10000H + m2*100H + m1))×1440 <= 1FFFFFFFH...Page 40: Print Raster Graphics Esc . C V H M Nl Nh D1
5.1.15. Print raster graphics ESC . c v h m nL nH d1...dk (c=0,1) ESC . c v h m nL nH d1...dk (c=0,1) Ver 1.00 [Name] Print raster graphics [Operation] [Format] 1BH, 2EH, c, v, h m, nL, nH, d1...dk [Range of Definition] c=0, 1, 2 (a description of the behaviour of this function when c == 2 is in the next section) v=10 (v/3600 dpi)- Page 41 In run-length encoding compression mode, the data to be printed is always transferred in the format (counter) + (data), where counter represents one byte of information. If 0 counter 127, then the data following the counter is non-compressed data, and the length of the compressed data is (counter)+1 bytes.
Page 42: Set Paper Dimensions Esc
5.1.16. Set paper dimensions ESC (S nL nH w1 w2 w3 w4 l1 l2 l3 l4 ESC (S nL nH w1 w2 w3 w4 l1 l2 l3 l4 Ver 1.00 [Name] Set paper dimension [Format] 1BH, 28H, 53H, nL, nH, w1, w2, w3, w4, l1, l2, l3, l4 [Range of Definition] nL=08, nH=00H 0 <= ( w4*1000000H + w3*10000H + w2*100H + w1 )*1440/(defined unit) <= 7FFFFFFFH...Page 43: Set The Raster Image Resolution Esc
5.1.17. Set the raster image resolution ESC (D nL nH rL rH v h ESC (D nL nH rL rH v h Ver 1.00 [Name] Set the raster image resolution [Format] 1BH, 28H, 44H, nL, nH, rL, rH, v,h [Range of Definition] nL=04H, nH=00H 0 <= v <= 127 0 <= h <=127...Page 44: Transfer Raster Image Esc I R C B Nl Nh Ml Mh D1
5.1.18. Transfer Raster image ESC i r c b nL nH mL mH d1..dk ESC i r c b nL nH mL mH d1..dk Ver 1.00 [Name] Transfer Raster image [Format] 1BH,69H, r, c, b, nL, nH, mL, mH, d1, d2, ..., dk [Range of Definition] r = 00H, 01H, 02H, 04H,11H,12H...Page 45: Turn Unidirectional Mode On/Off Esc U N
5.1.19. Turn unidirectional mode on/off ESC U n ESC U n Ver 1.00 [Name] Turn unidirectional mode on/off [Setting] [Format] 1BH, 55H, n [Range of Definition] n=00H, 01H, 02H, 30H, 31H, 32H [Function] The printing direction is selected according to the value of n in the following manner: n=00H or 30H: selects bi-directional printing n=01H or 31H:...Page 46: Set Relative Horizontal Print Position Esc
5.1.20. Set relative horizontal print position ESC (/ nL nH n1 n2 m1 m2 ESC (/ nL nH n1 n2 m1 m2 Ver 1.00 [Name] Set relative horizontal print position [Operation] [Format] 1BH, 28H, 2FH, nL, nH, m1,m2,m3,m4 [Range of Definition] nL=04H, nH=00H 0<=((m4*1000000H)+(m3*10000H)+(m2*100) + m1)×5760<=323.991 mm== 73472 inches (relative horizontal position setting value)Page 47: Set Print Method Id Esc
Ultra Premium Presentation Paper Matte(for U.S.A.) EPSON スーパーファイン紙 Photo 720 x 720 Photo Quality Inkjet Paper Presentation Paper Matte(for U.S.A.) EPSON スーパーファイン専用ラベルシート Photo 720 x 720 EPSON スーパーファイン専用ハガキ *1 Photo 720 x 720 普通紙（両面上質普通紙＜再生紙＞） Draft/Economy 360 x 360 2013/Feb/08 Revision: 1 Page: 47...- Page 48 n [Hex] *3 用紙名称 Resolution Print Quality ~ L/4x6/ ~A4/ ~A3/ Paper Type H x V [dpi] ハガキ Letter Plain Paper Normal 720 x 360 Bright white Inkjet paper Bright white paper(for U.S.A.) Fine 720 x 720 郵便光沢ハガキ *1 Normal 360 x 360 Fine 720 x 720...
Page 49: Chapter 6 : Remote Mode
I n a d d i t i o n t o E P S O N ’ s E S C / P a n d i t s e x t e n s i o n E S C / P 2 s e r i a l p r i n t e r l a n g u a g e s , m o s t E P S O N p r i n t e r s a l s o i m p l e m e n t another EPSON serial printer language that is bi-directional. That language is called Remote Mode. It is entered from ESC/P or ESC/P2 mode.- Page 50 All of the Remote Mode commands, except Enter Remote Mode, are available only in Remote Mode. The Enter Remote Mode and Exit Remote Mode commands begin with the ESC code, (as do many ESC/P2 commands). Excluding these commands, Remote Mode commands generally follow the following format: “...
Page 51: Enter Remote Mode (Remote Mode) Esc
6.1.1. Enter Remote Mode (Remote Mode) ESC (R 08H 00H 00H "REMOTE1" ESC "(R" 08H 00H 00H "REMOTE1" Enter Remote Mode [Format] ESC (R 08H 00H 00H "REMOTE1" [Function] 1) The current emulation mode is terminated 2) Print data present in the buffer is sent to the printer to be printed 3) The printer enters remote mode.Page 52: Load Power-On Default Nvr Into Ram (Remote Mode) "Ld" 00H 00H
6.1.2. Load Power-On Default NVR into RAM (Remote Mode) "LD" 00H 00H [Format] “ L D ” 0 0 H 0 0 H [Function] Loads the power-on default from a non-volatile memory into RAM, and begins using these values as the current printer operating system settings.Page 53: Set Printer Timer (Remote Mode) "Ti" 08H 00H 00H Yyyy Mm Dd Hh Mm Ss
6.1.3. Set printer timer " " (Remote Mode) 08H 00H 00H YYYY MM DD hh mm ss [Format] “ T I ” 0 8 H 0 0 H 0 0 H Y Y Y Y MM D D h h m m s s Each of the parameters YYH,YYL,MM,DD,hh,mm and ss is a one byte binary format parameter, and their definitions as follows: Parameter...Page 54: Set Horizontal Print Position (Remote Mode) " F P " 0 3 H 0 0 H 0 0 H M1 M2
(Remote Mode) “ F P ” 0 3 H 0 0 H 0 0 H m1 m2 6.1.4. Set horizontal print position [Format] “ F P ” 0 3 H 0 0 H 0 0 H m 1 m 2 : [Function] * T h e p a r a m e t e r “...Page 55: Turn Printer State Reply On/Off (Remote Mode) " S T " 0 2 H 0 0 H 0 0 H M1
6.1.5. Turn printer state reply on/off (Remote Mode) “ S T ” 0 2 H 0 0 H 0 0 H m1 [Format] “ S T ” 0 2 H 0 0 H 0 0 H m 1 [Parameters] * Parameter m1 is one byte binary parameter, and indicates the setting as follows: Printer State Reply Binary state reply Off Binary state reply On...Page 56: J O B N A Me S E T " J H " N L N H 0 0 H M1 M2 M3 M4 M5 < J O B N A Me
6.1.6. J o b n a me s e t “ J H ” n L n H 0 0 H m1 m2 m3 m4 m5 < j o b n a me > [Format] “ J H ” n L n H 0 0 H m 1 m 2 m 3 m 4 m 5nL = (length of ... Page 57: S T A R T J O B " J S " N N 0 0 H 0 0 H < J O B N A Me > M1
6.1.7. S t a r t j o b “ J S ” n n 0 0 H 0 0 H < j o b n a me > m1 6.1.8. E n d j o b “ J E ” 0 1 H 0 0 H 0 0 H [Format] “...Page 58: S E L E C T P A P E R Me D I A " Mi " 0 4 H 0 0 H 0 0 H M1 M2 M3
封筒 Envelope 写真用紙クリスピア＜高光沢＞ Ultra Glossy Photo Paper (Euro) Ultra Premium Glossy Photo Paper (U.S.A.) 郵便光沢はがき ---------------- 写真用紙エントリー＜光沢＞ Photo Paper Glossy (U.S.A.) Glossy Photo Paper (Euro/Asia) EPSON 両面マット紙（名刺サイズ） ---------------- CD/DVD レーベル ---------------- 高画質対応 CD/DVD レーベル ---------------- ｸﾘｰﾆﾝｸﾞｼｰﾄ ---------------- 2013/Feb/08 Page: 58...- Page 59 T h e “ m 3 ” d e s c r i b e s p a p e r s i z e a s s h o w n b e l o w . Paper Size Letter(8 1/2x11 in) Legal(8 1/2x14 in) Half-Letter(5 1/2x8 1/2 in)
- Page 60 [Function] Set paper type to the temporary default. The previous setting will be kept if the parameters are out of range. This command is available only in Remote. 2013/Feb/08 Revision: 1 Page: 60...
Page 61: U S E R S E T T I N G " U S " 0 3 H 0 0 H 0 0 H M1 M2
6.1.10. U s e r S e t t i n g “ U S ” 0 3 H 0 0 H 0 0 H m1 m2 [Format] “ U S ” 0 3 H 0 0 H 0 0 H m 1 m 2 [Parameters] T h e p a r a m e t e r “...Page 62: Set Mechanism Sequence "Sn" 01H 00H 00H
6.1.11. Set mechanism sequence "SN" 01H 00H 00H [Format] "SN" 01H 00H 00H [Parameters] None [Function] Changes the mechanical sequence from the default environment to the values specified by the below command. If the below command is not sent, the printer selects the plain paper mechanical sequence.Page 63: S E L E C T P A P E R P A T H " P P " 0 3 H 0 0 H 0 0 H M1 M2
6.1.12. S e l e c t p a p e r p a t h “ P P ” 0 3 H 0 0 H 0 0 H m1 m2 [Format] “ P P ” 0 3 H 0 0 H 0 0 H m 1 m 2 [Parameters] T h e p a r a m e t e r “...Page 64: Terminate Remote Mode (Remote Mode) Esc 00H 00H 00H
6.1.13. Terminate Remote Mode (Remote Mode) ESC 00H 00H 00H [Format] ESC 00H 00H 00H [Function] Copy the default environment to the current setting. Execute the ESC “ @” command in ESC/P2. (Execute software initialisation.) Exit from Remote mode and enter to the selected printer control language. 2013/Feb/08 Revision: 1 Page: 64...Page 65: Save Setting " Sv" 00H 00H
6.1.14. Save Setting “ SV” 00H 00H [Format] “ SV” 00H 00H [Function] * The default setting is saved to NVRAM as the default setting at power on. The all default settings are not necessarily saved. * This command is available only in Remote. 2013/Feb/08 Revision: 1 Page: 65...Page 66: Chapter 7 : Status Reply Code Specification
By monitoring this information on the host computer, you can provide users with basic yet very practical information that can make it easier for customers to use your software and EP-4004/Artisan 1430/Stylus Photo 1430W/1500W ink jet printers.Page 67: Status Code
7.1. Status code Structure Item Byte(Hex) Value(Hex) Header Parameter counter ParameterThe parameter is one byte Binary code that indicates status code as follows. Status Status code In the error state In the self printing state In the busy state In the waiting state In the idle state... Page 68: Error Code
7.2. Error code Structure Item Byte(Hex) Value(Hex) Header Parameter counter ParameterThe parameter < Error code > is one byte Binary code that indicates error code as follows. Error Error code Fatal error Other I/F is selected Cover Open (CDR guide open error) Paper jam Ink out Paper out... Page 69: Warning Code
7.3. Warning code Structure Item Byte(Hex) Value(Hex) Header Parameter counter Warning kinds Parameter Occurred all warning code The parameteris one-byte Binary and indicates the warning code as follows, is consisted of the several fields as shown below. When several warning appears at the same time, reply all the warning codes with the format below. Page 70: Paper Path
7.4. Paper path Structure Item Byte(Hex) Value(Hex) Header Parameter counter Parameter paper path information The parameteris two bytes Binary code that indicate current paper path. Paper Path code 01FF Cut sheet 0201 CD-R 7.5. Cleaning time information Structure Item Byte(Hex) Page 71: Ink Information
7.7. Ink information Structure Item Byte(Hex) Value(Hex) Header Parameter total counter Parameter counter for 1 I/C Parameter 3 per 1 I/C Ink information The ink information order is Yellow, Magenta, Cyan, Matte Black, Photo Black, Red, Orange, Gloss Optimizer, Blue. Each ink cartridge information is consisted of m1, m2, m3.Page 72: Cancel Code
7.9. Cancel code Structure Item Byte(Hex) Value(Hex) Header Parameter counter Parameter Cancel request The parameter < cancel code > is one byte Binary code that indicates the cancel request. Cancel request Code No request The status during received cancel command and initialize the printer Request 7.10.Page 73: Chapter 8 : Device Id
CHAPTER 8 : Device ID The EPSON EP-4004/Artisan 1430/Stylus Photo 1430W/1500W printer can send its device ID when it is requested. When IEEE1284.4 is enabled, @EJLID MFG:EPSON; CMD:ESCPL2,BDC,D4,D4PX,ESCPR1; MDL:Model Name; CLS:PRINTER; DES:EPSON Model Name; CID:EpsonRGB; FID:FXN, DPN, WFA, ETN, AFN, DAN;...