Installing a 7360 ISAM WM shelf
21.3 Mounting the 7360 ISAM WM shelf in a 23 in.
The 7360 ISAM WM shelf can be mounted vertically in a 23 in. rack.
The 7360 ISAM WM is suitable for the following:
•
•
•
21.3.1
The 7360 ISAM WM shelf can be mounted vertically in a standard 23 in. rack with a
21.5 in. opening.
21.3.1.1
Table
shelf in a 23 in. rack, used in conjunction with a 7360 ISAM FX-16 shelf and
associated components.
396
rack
The 7360 ISAM WM is intended to be installed in a
Warning —
restricted access location (RAL) in accordance with the
applicable requirements of NEC or CEC. The local authorities
have jurisdiction. This unit is intended to be installed by
qualified service personnel only.
Due to high heat dissipation for the 7360 ISAM WM
Caution —
shelf, special shelf room cooling may be required, or aisle
spacing may need to be increased.
rack mounting on concrete floors or other non-combustible surfaces with the use
of a drip tray
use in an installation using an IBN or a CBN
use in:
•
network telecommunication facilities
•
locations where the NEC applies
•
OSP
7360 ISAM WM rack mounting
The 7360 ISAM WM drip tray must be used in a
Caution —
vertical mount installation to meet NEBS preferred airflow
specifications (air flows in the front, and out the rear of the
shelf).
7360 ISAM WM rack mounting configurations
16
describes the vertical rack mounting configuration for a 7360 ISAM WM
3HH-12893-AAAA-TCZZA
ANSI Hardware Installation Manual
DRAFT
Issue: 09