Step 2 : Setting Up The Remote Commander - Sony SLV-D360P Operating Instructions (For SLV-D360P DVD Player) Operating Instructions Manual
Dvd/vcr combo: dvd player/video cassette recorder
Hide thumbs
Also See for SLV-D360P Operating Instructions (For SLV-D360P DVD Player):
- Service manual (123 pages) ,
- Specifications (2 pages) ,
- Note (1 page)
Table of Contents
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and – on the batteries
to the diagram inside the battery
compartment.
Insert the negative (–) end first, then
push in and down until the positive
(+) end clicks into position.
Using the remote
commander
You can use this remote commander
to operate this DVD-VCR and a Sony
TV. Buttons on the remote
commander marked with an orange
dot (•) can be used to operate your
Sony TV.
If the TV does not have the
symbol near the remote sensor, this
remote commander will not operate
the TV.
To operate
the DVD player
the VCR
your TV
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• Do not leave the remote commander in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so
may cause a malfunction.
10
Setting up the remote commander
TV /
DVD·VIDEO
Set TV / DVD·VIDEO to
DVD·VIDEO, then press SELECT DVD and point at the remote sensor at
the DVD-VCR
DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor
at the DVD-VCR
TV and point at the remote sensor at your TV
Remote sensor
SELECT
VIDEO
SELECT
DVD
Hide quick links:
Table of Contents
