Log-Peer-Change Enable - HP 6127XLG Series Command Reference Manual

Parameters

interval-value: Specifies a GR restart interval in the range of 30 to 1800 seconds.

Usage guidelines

This command sets the T2 timer to control the maximum amount of time for LSDB synchronization during

a restart.

The device advertises the T2 timer as the adjacency hold time to its neighbor during a GR process.

Before the timer expires, the neighbor maintains the adjacency with the device. If the device fails to

complete the restart before this timer expires, the neighbor removes the adjacency. The GR process fails.

Examples

# Set the GR restart interval to 120 seconds for the VXLAN IS-IS process.

[Sysname] vxlan-isis

[Sysname-vxlan-isis] graceful-restart interval 120

Related commands

display vxlan isis graceful-restart status

Use log-peer-change enable to enable VXLAN IS-IS adjacency change logging.

Use undo log-peer-change enable to disable outputting VXLAN IS-IS adjacency change log.

Syntax

log-peer-change enable

undo log-peer-change enable

Default

VXLAN IS-IS adjacency change logging is enabled.

Views

VXLAN IS-IS view

Predefined user roles

network-admin

Usage guidelines

Adjacency change logging enables the VXLAN IS-IS process to send a log message to the information

center when an adjacency change occurs. With the information center, you can set log message filtering

and output rules, including output destinations. For more information about using the information center,

see Network Management and Monitoring Configuration Guide.

Examples

# Disable adjacency change logging for the VXLAN IS-IS process.

[Sysname] vxlan-isis

[Sysname-vxlan-isis] log-peer-change enable

52