Filtering Ip/Mac Addresses - Honeywell equIP Series User Manual

2mp/4mp low light wdr ip camera

Hide thumbs Also See for equIP Series:

Table of Contents

You can use a DDNS service to track and update your camera's dynamic IP address, so that

even when the numeric IP address changes the DDNS address always remains the same.

To access your camera using a DDNS service:

free DDNS service (www.hennvr-ddns.com).

Select the Server Type check box.

Select your DDNS service from the Server Type drop-down list.

In the Domain Name field, enter the domain name (hostname) that you registered with

the DDNS service (for example, mycamera.dyndns.org).

In the User Name and Password fields, enter the user name and password of the

account that you registered in step 1.

In the Update Period field, enter the interval in minutes between address updates sent

to the DDNS server.

If you selected Honeywell DDNS as your DDNS service, the domain

name is set to the camera's MAC address by default and no user

Note

name or password are required. Set Mode to Auto or Manual. If you

configure the domain name manually, click Test to verify that the

domain name is registered.

Click Save to apply the settings. You can now access the camera by entering the

domain name in your browser's address bar.

Filtering IP/MAC Addresses

You can configure IP filter settings on the Setup  Network Setup  IP Filter page.

Configuring Network Settings

Table of Contents