Page 1
The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. MEX-BT2800 Serial No.
Page 2
Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate The “HD Radio Ready” logo indicates that this product will control a Sony HD Radio (sold separately). For HD Radio tuner operation, please refer to the HD Radio tuner Operating Instructions.
Page 3
(sold separately). Please see your nearest authorized Sony dealer for details on the satellite radio tuner module. “SAT Radio,” “SAT Radio Ready,” the SAT Radio and SAT Radio Ready logos and all related marks are trademarks of Sirius XM Radio Inc.
Table of Contents Getting Started Playable discs on this unit ....6 Notes on Bluetooth ..... . 6 Resetting the unit .
Page 5
Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://esupport.sony.com http://www.xplodsony.com/ Provides information on: • Models and manufacturers of compatible cellular phones and the FAQ about Bluetooth function...
IMPORTANT NOTICE! Safe and efficient use Changes or modifications to this unit not expressly approved by Sony may void the user’s authority to operate the equipment. Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product.
Canceling the DEMO mode You can cancel the demonstration display which appears during turning off. Press and hold the select button. The setup display appears. Press the select button repeatedly until “DEMO” appears. Rotate the control dial to select “DEMO-OFF.” Press and hold the select button.
Connection Sometimes pairing allows to connect automatically. To use the device after pairing is made, start the connection. Handsfree calling/Music streaming You can talk handsfree and listen to music when the connection is made. Support site http://esupport.sony.com http://www.xplodsony.com/...
Buttons and icons Icon status descriptions Flashing None Flashing None Flashing None Icons Bluetooth signal on Pairing standby mode Bluetooth signal off Cellular phone connection successful Unit connecting to cellular phone No connection Audio device connection successful Unit connecting to audio device No connection...
1 Pairing Operated Operation equipment Press and hold (BT) for about 5 seconds. Search for this unit. Input passkey “0000”. Follow display directions. 2 Connection Operated Operation equipment Press and hold (BT) for about 3 seconds. Connect to this unit using a cellular phone. Connect to this unit using an audio device.
3 Handsfree calling and Music streaming Handsfree calling To do Receive a call/end a call Reject a call Redial To transfer a call Music streaming To do Listen Play back/pause (AVRCP)* Skip tracks (AVRCP)* * The operation may differ depending on the audio device. Operation Press Press and hold...
Location of controls and basic operations Main unit SOURCE SEEK MODE SEEK SCRL DSPL Front panel removed RESET ALBUM SHUF This section contains instructions on the location of controls and basic operations. For details, see the respective pages. A SEEK +/– buttons To skip tracks (press);...
Page 13
D Control dial/select / (handsfree) button To adjust volume (rotate); select setup items (press and rotate); receive/end a call (press). E Disc slot Insert the disc (label side up), playback starts. F Display window G AUX input jack page 23 To connect a portable audio device.
Card remote commander RM-X304 SOURCE – DSPL – Remove the insulation film before use (page 7). A OFF button To turn off; stop the source. B SOURCE button* To turn on; change the source (Radio/CD/ AUX/Bluetooth audio/Bluetooth phone). MODE C < (.)/, (>) buttons To control Radio/CD/Bluetooth audio, the same as (SEEK) –/+ on the unit.
Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM Press (SOURCE/OFF) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2.
RDS services This unit automatically provides RDS services as follows: PTY (Program Types) Displays the currently received program type. Also searches your selected program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. Notes • Depending on the country/region, not all RDS functions may be available.
Display items A Source B Track name* , Disc/artist name* name* , Album number* , Album name* Track number/Elapsed playing time, Clock *1 The information of a CD TEXT, MP3/WMA is displayed. *2 Album number is displayed only when the album is changed.
3 Handsfree calling/Music streaming You can talk handsfree and listen to music when the connection is made. Support site http://esupport.sony.com http://www.xplodsony.com/ Pairing First, register (“pair”) a Bluetooth device (cellular phone, etc.) and this unit with each other. You can pair up to 8 devices. Once pairing is established, there is no need for pairing again.
Connection If pairing has already been achieved, start operation from here. To switch the Bluetooth signal output of this unit to on To use the Bluetooth function, switch the Bluetooth signal output of this unit to on. Press and hold (BT) until “ (about 3 seconds).
Making calls In the case of making calls from this unit, redial is used. Press (SOURCE/OFF) repeatedly until “BT PHONE” appears. Press and hold (handsfree) for 3 seconds or more. The phone call starts. To end a call Press (handsfree) again. To call another phone, use your cellular phone, and then transfer the call.
Operating an audio device with this unit You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device.) Press (6) (PAUSE)* on this unit. Play (6) (PAUSE)* on this unit.
Customizing the equalizer curve — EQ3 “CUSTOM” of EQ3 allows you to make your own equalizer settings. Select a source, then press the select button repeatedly to select “EQ3.” Rotate the control dial to select “CUSTOM.” Press the select button repeatedly until “LOW,”...
Using optional equipment Auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device.
– CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet/Romeo or multi-session. Playback order of MP3/WMA files MP3/WMA About MP3 files • MP3, which stands for MPEG-1 Audio Layer-3, is a music file compression format standard.
• If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.
Removing the unit Remove the protection collar. 1 Detach the front panel (page 7). 2 Pinch both edges of the protection collar, then pull it out. Remove the unit. 1 Insert both release keys simultaneously until they click. 2 Pull the release keys to unseat the unit. 3 Slide the unit out of the mounting.
Before going through the checklist below, check the connection and operating procedures. If the problem is not solved, visit the following support site. Support site http://esupport.sony.com http://www.xplodsony.com/ General No power is being supplied to the unit. • Check the connection or fuse.
Page 28
The display disappears from/does not appear in the display window. • The dimmer is set to “DIM-ON” (page 22). • The display disappears if you press and hold (SOURCE/OFF). t Press (SOURCE/OFF) on the unit until the display appears. • The connectors are dirty (page 25). The Auto Off function does not operate.
The character cannot be displayed with the unit. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.
Page 30
(vendu séparément). Consultez votre détaillant agréé Sony le plus proche pour en savoir plus sur le fonctionnement du module récepteur radio satellite. « SAT Radio », « SAT Radio Ready », les logos SAT Radio et SAT Radio Ready, ainsi que toutes les marques associées sont des marques de...
Page 31
Ce produit est protégé par des droits de propriété intellectuelle de Microsoft Corporation. Toute utilisation ou diffusion de la technologie décrite sortant du cadre de l’utilisation de ce produit est interdite sans licence accordée par Microsoft ou une filiale autorisée de Microsoft. Remarque sur la pile au lithium N’exposez pas la pile à...
Page 32
Table des matières Préparation Disques pouvant être lus par cet appareil ..6 Remarques sur la fonction Bluetooth ..6 Réinitialisation de l’appareil ....6 Désactivation du mode DEMO .
Page 33
Sites d’assistance Si vous avez des questions ou si vous souhaitez consulter les dernières informations d’assistance sur ce produit, visitez les sites Web suivants : http://esupport.sony.com http://www.xplodsony.com/ Fournissent des informations sur : • Modèles et fabricants de téléphones mobiles compatibles et FAQ sur la...
Type de disque CD-DA Remarques sur la fonction Bluetooth Attention SONY NE PEUT EN AUCUN CAS ÊTRE TENU RESPONSABLE DE TOUT DOMMAGE DIRECT OU INDIRECT OU DE TOUT AUTRE DOMMAGE, Y COMPRIS, SANS LIMITATION, TOUTE PERTE DE REVENU, DE DONNÉES, D’UTILISATION DU PRODUIT OU DE TOUT...
Désactivation du mode DEMO Vous pouvez désactiver l’écran de démonstration qui apparaît au cours de la mise hors tension. Appuyez sur la touche de sélection et maintenez-la enfoncée. L’écran de configuration apparaît. Appuyez plusieurs fois sur la touche de sélection jusqu’à ce que « DEMO » s’affiche.
Parfois le pairage permet une connexion automatique. Pour utiliser le périphérique une fois le pairage effectué, lancez la connexion. Appel en mains libres/Transmission en continu de musique Vous pouvez parler en mains libres et écouter de la musique une fois la connexion effectuée. Sites d’assistance http://esupport.sony.com http://www.xplodsony.com/...
Touches et icônes Descriptions du statut des icônes Allumé Clignotant Aucune Allumé Clignotant Aucune Allumé Clignotant Aucune Icônes Signal Bluetooth activé Mode de veille de pairage Signal Bluetooth désactivé Connexion du téléphone cellulaire réussie Appareil se connectant au téléphone cellulaire Aucune connexion Connexion du périphérique audio réussie Appareil se connectant au périphérique audio...
1 Pairage Appareil en Fonctionnement fonction Appuyez sur la touche (BT) et maintenez-la enfoncée pendant environ 5 secondes. Recherche de cet appareil. Entrez la clé d’authentification « 0000 ». Suivez les consignes à l’écran. 2 Connexion Appareil en Fonctionnement fonction Appuyez sur la touche (BT) et maintenez-la enfoncée pendant environ 3 secondes.
3 Appel en mains libres et transmission de musique en continu Appel en mains libres Action Recevoir un appel/terminer un appel Rejeter un appel Recomposer un numéro Pour transférer un appel Transmission en continu de musique Action Écouter Lecture/pause (AVRCP)* Ignorer des plages (AVRCP)* * Le fonctionnement peut différer selon le périphérique audio.
Emplacement des commandes et opérations de base Appareil principal SOURCE SEEK MODE SEEK SCRL DSPL Sans la façade RESET ALBUM SHUF Cette section contient les instructions relatives à l’emplacement des commandes et aux opérations de base. Pour plus de détails, reportez-vous aux numéros de pages correspondants.
Page 41
D Molette de réglage/sélection/ réception - fin d’appel libres) Permet de régler le niveau de volume (tournez) ; de sélectionner les paramètres du son (appuyez et tournez) ; de recevoir ou mettre fin à un appel (appuyez). E Fente du disque Insérez le disque (côté...
Mini-télécommande RM-X304 SOURCE – DSPL – Retirez la feuille isolante avant l’utilisation (page 7). A Touche OFF Permet d’éteindre l’appareil/d’arrêter la source. B Touche SOURCE* Pour mettre l’appareil sous tension ; changer de source (Radio/CD/AUX/son Bluetooth/ téléphone Bluetooth). C Touches < (.)/, (>) Permettent de commander la Radio/le CD/le son Bluetooth, identiques aux touches (SEEK) –/+ de l’appareil.
Radio Mémorisation et réception des stations Attention Pour syntoniser des stations pendant que vous conduisez, utilisez la fonction de mémorisation des meilleurs accords (BTM) afin d’éviter les accidents. Mémorisation automatique — BTM Appuyez plusieurs fois sur (SOURCE/OFF) jusqu’à ce que «...
Services RDS Cet appareil propose automatiquement les services RDS, comme suit : PTY (Type d’émission) Permet d’afficher le type de l’émission en cours et de rechercher votre type d’émission sélectionné. CT (Heure) Les données CT accompagnant la transmission RDS assurent un réglage de l’horloge. Remarques •...
Parfois le pairage permet une connexion automatique. 3 Appel en mains libres/Transmission en continu de musique Vous pouvez parler en mains libres et écouter de la musique une fois la connexion effectuée. Sites d’assistance http://esupport.sony.com http://www.xplodsony.com/...
Pairage Commencez par effectuer une reconnaissance (« pairage ») entre un périphérique Bluetooth (téléphone cellulaire, etc.) et cet appareil. Vous pouvez apparier jusqu’à 8 périphériques. Une fois le pairage effectué, il est inutile de recommencer. Placez le périphérique Bluetooth à 1 m (3 pieds) maximum de cet appareil.
Connexion d’un téléphone cellulaire Veillez à ce que le signal Bluetooth soit activé sur cet appareil et sur le téléphone cellulaire. Connectez-vous à cet appareil à l’aide du téléphone cellulaire. « » s’affiche une fois la connexion établie. Connexion du dernier téléphone cellulaire connecté...
Appels Si vous effectuez des appels à partir de cet appareil, la recomposition du numéro est utilisée. Appuyez plusieurs fois sur (SOURCE/OFF) jusqu’à ce « BT PHONE » s’affiche. Appuyez sur la touche libres) et maintenez-la enfoncée pendant 3 secondes minimum. L’appel commence.
Fonctionnement d’un périphérique audio avec cet appareil Vous pouvez effectuer les opérations suivantes sur cet appareil si le périphérique audio prend en charge le profil AVRCP (Audio Video Remote Control Profile) de la technologie Bluetooth. (Le fonctionnement diffère selon le périphérique audio.) Pour Appuyez sur...
Autres fonctions Changement des réglages du Réglage des caractéristiques du Appuyez plusieurs fois sur la touche de sélection jusqu’à ce que le paramètre de votre choix apparaisse. Tournez la molette de réglage pour régler le paramètre sélectionné. Après 5 secondes, le réglage est terminé et l’écran d’affichage revient en mode de lecture/réception normal.
Les paramètres suivants peuvent être réglés (reportez-vous à la page indiquée pour plus de détails) : CLOCK-ADJ (Réglage de l’horloge) (page 7) CT (Heure) Permet d’activer la fonction CT : « ON », « OFF » (page 16). BEEP Permet d’activer le bip : « ON », « OFF ». AUX-A* (AUX audio) Permet d’activer l’affichage de la source AUX :...
Réglage du niveau de volume Avant de commencer la lecture, n’oubliez pas de régler le volume de chaque périphérique audio raccordé. 1 Diminuez le volume de l’appareil. 2 Appuyez plusieurs fois sur (SOURCE/OFF) jusqu’à ce que « AUX » s’affiche. L’indication «...
Remarques sur les disques CD-R et CD-RW • Nombre maximal de : (CD-R/CD-RW uniquement) – dossiers (albums) : 150 (y compris le répertoire racine). – fichiers (plages) et dossiers : 300 (lorsqu’un nom de dossier ou de fichier contient beaucoup de caractères, ce nombre peut être inférieur à...
Sony le plus proche. Si vous avez des questions ou des problèmes concernant cet appareil qui ne sont pas abordés dans ce mode d’emploi, contactez votre revendeur Sony. Entretien Remplacement de la pile au lithium de la mini-télécommande Dans des conditions d’utilisation normales, la...
Si le nouveau fusible saute également, il est possible que l’appareil soit défectueux. Dans ce cas, consultez votre revendeur Sony le plus proche. Nettoyage des connecteurs L’appareil risque de ne pas fonctionner correctement si les connecteurs entre l’appareil et la façade sont souillés.
Caractéristiques techniques Radio Radio FM Plage de syntonisation : 87,5 à 107,9 MHz Borne d’antenne : connecteur d’antenne externe Fréquence intermédiaire : 150 kHz Sensibilité utile : 10 dBf Sélectivité : 75 dB à 400 kHz Rapport signal/bruit : 70 dB (mono) Séparation : 40 dB à...
Si le problème persiste, visitez le site d’assistance suivant. Sites d’assistance http://esupport.sony.com http://www.xplodsony.com/ Généralités L’appareil n’est pas alimenté. • Vérifiez le raccordement ou le fusible. • Si vous mettez l’appareil hors tension et que l’affichage disparaît, vous ne pouvez pas le...
Page 58
Une émission FM en stéréo est entendue en mode mono. L’appareil est en mode de réception mono. t Sélectionnez le réglage « MONO-OFF » (page 23). Fonction RDS PTY affiche « - - - - - - - - ». •...
OFFSET Il est possible qu’il y ait un problème de fonctionnement. t Vérifiez le raccordement. Si le message d’erreur reste affiché, contactez votre revendeur Sony le plus proche. READ L’appareil lit toutes les informations de plage et d’album sur le disque.
Page 60
If you have any questions/problems regarding this product, try the following: Read Troubleshooting in these Operating Instructions. Reset the unit. Note: Stored data may be erased. Please contact (U.S.A. only); Call http://www.sony.net/ Sony Corporation Printed in Thailand 1-800-222-7669 http://www.SONY.com...