Warning Indicators And Messages - Sony Handycam HDR-SR1E Operating Manual
Digital hd video camera recorder
Hide thumbs
Also See for Handycam HDR-SR1E:
- Operating manual (139 pages) ,
- Service manual (90 pages) ,
- Operating manual (2 pages)
Table of Contents
Warning indicators and messages
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen or in
the viewfinder, check the following.
Some symptoms you can fix by yourself. If
the problem persists even after you have tried
a couple of times, contact your Sony dealer
or local authorized Sony service facility.
C:(or E:) ss:ss (Self-diagnosis
display)
C:04:ss
• The battery pack is not an
"InfoLITHIUM" battery pack. Use an
"InfoLITHIUM" battery pack (p.114).
• Connect the DC plug of the AC
Adaptor to the DC IN jack securely
(p.24).
C:13:ss / C:32:ss
• Remove the power source. Reconnect it
and operate your camcorder again.
E:20:ss / E:31:ss / E:61:ss /
E:62:ss / E:91:ss / E:94:ss
• A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from "E".
101-0001 (Warning indicator
pertaining to files)
Slow flashing
• The file is damaged.
• The file is unreadable.
(Warning on the hard disk of the
camcorder)*
Fast flashing
• An error may have occurred with the
hard disk drive in your camcorder.
(Warning on the hard disk of the
camcorder)*
Fast flashing
• The hard disk of the camcorder is fully
recorded.
• An error may have occurred with the
hard disk drive in your camcorder.
E (Battery level warning)
Slow flashing
• The battery pack is nearly used up.
• Depending on the operating
environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
• The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
Fast flashing
*
• The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
(Low temperature warning)
Fast flashing
• The temperature of your camcorder is
extremely low. Make the camcorder
warm.
(Warning indicator pertaining to
"Memory Stick Duo")
• No "Memory Stick Duo" is inserted
(p. 32).
(Warning indicators pertaining to
"Memory Stick Duo" formatting)*
• The "Memory Stick Duo" is damaged.
• The "Memory Stick Duo" is not
formatted correctly (p. 62, 112).
*
103
Continued ,
Chapters
Table of Contents
