Table of Contents
To use settings of the paint adjustment data
stored in the "independent data region" even
when a remote control unit is connected
Set RM COMMON MEMORY to ON on the FUNCTION
3 page of the MAINTENANCE menu.
In this case, the settings stored in the "independent data
region" will be renewed according to the change made by
remote control unit. Thus, the settings of the paint data
made with the remote control unit can be retained even if
the remote control unit is removed. However, if the switch
position on the remote control unit differs from the one on
the camcorder, the switch position on the camcorder takes
precedence over that on the remote control unit.
For details on menu operations, see "Basic menu
operations" on page 93.
To avoid changing video adjustment data when a
remote control unit is connected
Set RM COMMON MEMORY to ON on the FUNCTION
3 page of the MAINTENANCE menu, and set all the
volume on the remote control unit to the relative value
mode.
For details, refer to the operation manual supplied with
the remote control unit.
39
Connecting the Remote Control Unit (DSR-450WS/450WSP only)
- Quick Links:
- Camera Features
Hide quick links:
Table of Contents
