Soft Counter - Canon imageRUNNER ADVANCE 8205 Service Manual
Hide thumbs
Also See for imageRUNNER ADVANCE 8205:
- Media manual (2 pages) ,
- Setup manual (88 pages) ,
- Operation manual (264 pages)
Table of Contents
Item
Scanner Sensors
(Pickup
58
Assembly)
Scanner Sensor
(Feeding
59
Assembly)
Q. Soft Counter
The imageRUNNER ADVANCE 8200 Series machines use soft counters to
track their functional copy use. The control panel displays up to six counters
on the Counter Status Check screen (when the Counter Check key on the
control panel is pressed). By default, the imageRUNNER ADVANCE 8200
Series machines display 4 out of 6 counters on the Counter Status Check
screen.
The table below indicates the default counter configurations of the
imageRUNNER ADVANCE 8200 Series machines displayed on the Counter
Status Check screen. For more information on the soft counter
configurations, see the imageRUNNER ADVANCE 8205/8295/8285 Series
Service Manual. Specifically, refer to the Service Mode section of the Service
Manual that covers the setting under COPIER > OPTION > USER.
Table 30 – Soft Counter Configuration
Counter
1
2
3
4
5
6
The displayed counters can be changed, enabled, or disabled in the Service
Mode, except for Counter 1. Counter 1 cannot be changed under any
circumstances.
58
Includes Left Deck Pickup Sensor 2 (PS20), Right Deck Pickup Sensor 2 (PS19), Cassette 3 Pickup Sensor 2 (PS21), and
Cassette 4 Pickup Sensor 1 (PS22).
59
Includes Vertical Path Sensor 1 (PS24), Multi-Purpose Tray Last Paper Sensor (PS28), Registration Sensor (PS29), Reverse
Vertical Path Sensor (PS65), Duplex Outlet Sensor (PS64), Duplex Merge Sensor (PS67), and Duplex Left Sensor (PS66).
60
Refers to large size paper (when the paper length exceeds 14" (364 mm) in the paper feed direction).
imageRUNNER ADVANCE 8200 Series Service Guide
imageRUNNER ADVANCE 8200 Series Service Guide
Maintenance Interval (Sheets)
250,000
300,000
500,000
Description
101: Total 1
60
103: Total (Large
)
201: Copy (Total 1)
60
203: Copy (Large
)
Not displayed
Not displayed
As
1,000,000
Needed
Remove paper lint with a
blower at the same time the
Clean
Separation Roller is
replaced.
Remove paper lint with a
Clean
blower.
Default Display
On
On
On
On
Service Mode setting to
Off
Off
Remarks
Default Switch
Fixed
May be changed via
any available counter.
November 2012
Page 76
- Quick Links:
- Staple Finisher-N1
- Booklet Finisher-N1
Hide quick links:
Table of Contents
