Bosch DIVAR NETWORK 2000 Technical Notes
Using sony onvif cameras on divar network recorders
Hide thumbs
Also See for DIVAR NETWORK 2000:
- Operation manuals (86 pages) ,
- Installation manual (22 pages) ,
- Operation manual (94 pages)
Quick Links
See also:
Operating Manual, Installation Manual
Security Systems
From
ST-VS/MKP-L3
Technical note: Sony cameras on DIVAR network
Using Sony ONVIF cameras on DIVAR network recorders
Contents:
•
Requirements
•
Installation
•
Basic DIVAR network configuration
•
Configuring VMD & streaming on Sony cameras
•
DIVAR App, configuring streaming on Sony cameras
Requirements:
DIVAR Network 2000/3000/5000 Firmware 1.2.1 or later.
Sony IP camera 600 series Firmware V2.8 or later (refer to supported device list at the end of
this document).
Windows™ PC (Windows 7 or later). **
SNC-Toolbox software V1.4.4.0 or later. **
DIVAR mobile APP (optional)
Installation: (DIVAR network 2000/3000/5000 with PoE)
A USB mouse and a display should be connected to the DIVAR.
Connect the cameras to the DIVAR network and power up the unit.
The cameras receives power from the DIVAR and take about 90 seconds to boot, after the
DIVAR unit has powered up.
When the DIVAR has booted, follow the steps
in the wizard, see next page.
Our Reference
Tel
n.a.
Notes:
** Items are required to configure VMD
and streaming in the Sony network camera
Eindhoven
8 November 2017
Page 1 of 11
Related Manuals for Bosch DIVAR NETWORK 2000
Summary of Contents for Bosch DIVAR NETWORK 2000
- Page 1 • DIVAR App, configuring streaming on Sony cameras Requirements: DIVAR Network 2000/3000/5000 Firmware 1.2.1 or later. Sony IP camera 600 series Firmware V2.8 or later (refer to supported device list at the end of this document). Windows™ PC (Windows 7 or later). ** Notes: SNC-Toolbox software V1.4.4.0 or later.
- Page 2 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. Set the device language. Set the system password. IMPORTANT: We recommend using a strong password rather than the default, when the system is in normal use. Set the time and date as required. Note: Correct date and time is required for some ONVIF devices to communicate correctly.
- Page 3 At the camera configuration page you will see detected devices automatically displayed as shown below. In this example 3 Sony cameras were connected and one Bosch camera. The Bosch camera was connected automatically, however the Sony cameras were detected but connection has timed out so a red dot is shown in the status information.
- Page 4 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. Below all the status indications are green and you can see live images from all of the cameras. Click ‘Finished’ to close the wizard. At this stage all cameras are live streaming and will be recording continuously. The recording schedule and event based recording can be configured.
- Page 5 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. Select the ALARM tab and Motion detect. Here we can enable motion detection based recording for each camera. Note: On Sony cameras motion detection must be configured in the camera web page before it will work with the DIVAR, camera configuration is described later in this document.
- Page 6 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. In the live view screen, the red dot in the image indicates recording. The yellow running person indicates motion detection. Page 6 of 11...
- Page 7 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. Configuring VMD & Streaming on Sony Cameras: For motion based recording In Sony cameras Video Motion Detection is OFF by default. To enable VMD you must log in to the camera from a Windows™ PC and change the setting in the web browser (Internet Explorer).
- Page 8 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. Configuring VMD on Sony Cameras: Select Detection area, and add an area to the image, follow the three steps below: 2) Drag the corners to define the area 1) Click add area 3) Click OK to complete Close the setting menu.
- Page 9 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. DIVAR APP - Configuring Streaming on Sony Cameras: When the DIVAR APP is used with the DIVAR network recorder, a second, lower bit rate stream is used for the APP viewer. In Sony cameras, only one stream is enabled by default so to use the APP a second stream must be enabled;...
- Page 10 DIVAR network 2000 8PoE has a power budget of 115W (25,5W max. per port) DIVAR network 2000/3000 16PoE has a power budget of 130W (25,5W max. per port) DIVAR network 5000 16PoE has a power budget of 200W (25,5W max. per port) Information is subject to change without notice.
- Page 11 Security Systems Eindhoven 8 November 2017 From Our Reference ST-VS/MKP-L3 n.a. Trouble shooting Camera does not power up – LEDS don’t light on the camera Check the if power budget is exceeded (total 115W for 8PoE network 2000, 130W for network 2000/3000 or 200W for network 5000 model) ...