Motorola BT06 User Manual

MOTOROLA INC

MOTOROLA BLUETOOTH MODULE BT06 USER MANUAL

1. GENERAL:

The Bluetooth Module BT06 facilitates a wireless Bluetooth interface between a

wireless handset and other Bluetooth-enabled devices. The Bluetooth Module BT06 is

assembled internally to a Motorola Telematics Control Unit, which is a finished product

supplied to the automotive market. The Bluetooth Module BT06 should be considered a

module.

2. ANTENNA AND MODULE INSTALLATION:

The module utilizes an external antenna through a pc board mounted connector

that is unique to this application. The external antenna used in this application is a BMW

supplied antenna, BMW part number 6 928 461. The unit is designed for installation

within the Telematics Control Unit and located in an automobile, usually in the trunk

area. The device is mounted within a metal housing. Due to the low power at which the

unit transmits (0.0025 W max.), placement from an SAR perspective is not critical.

No end-user installation is involved of the Bluetooth module and is only

performed by Motorola or approved contractor. Any unauthorized changes or

modifications not expressly approved by Motorola could void the user's authority to

operate this equipment.

3. I/O CONNECTION:

A board mounted 22-pin female connector is utilized to provide power and

vehicle bus communications to the module. This connector will only mate with a

corresponding connector in the Telematics Control Unit..

• Frequency range:

• Operating current:

• Operating voltage:

• Operating temp. range:

• Storage temp. range:

• Output power:

[Model# BT0606AL09]

2402 MHz – 2480 MHz

1.5A nominal

13.2V nominal

-30°C to +70°C

-40°C to +85°C

0.0025 W max

FCC ID: IHDT6CS1