Table of Contents
Web configurator
Display name (optional)
Enter any name that should be shown
in the other caller's display when you
call him via the Internet (example:
Anna Sand). All characters in the UTF8
character set (Unicode) are permitted.
The name must not exceed 32 charac-
ters.
If you do not enter a name, your
VoIP phone number will be dis-
name
played.
Ask your VoIP provider if this feature is
supported.
Area:
Call Forwarding
You can also forward calls to this VoIP
number to another external number (VoIP,
fixed network or mobile phone). The for-
warding is done via VoIP.
The
Call Forwarding
area is where you
define for the VoIP number whether and
when calls for this number should be for-
warded to another number.
You can also use the handset to set the for-
warding and activate/deactivate it, see
page 27.
Status
Use the
/
option to activate or
On
Off
deactivate the call forwarding.
When
Choose when an incoming call should
be forwarded:
When busy
Always.
Call number
Enter the phone number to which the
calls should be forwarded. Please note
that you may have to enter the area
code when forwarding to a fixed net-
work number in the same area
(depending on your VoIP provider and
the setting for the automatic area
code, see page 64).
The settings only affect the selected VoIP
phone number.
58
User-
/
/
No reply
Area:
General Provider Data
If you have downloaded the general
settings for your VoIP provider from the
Siemens configuration server (page 62),
then the fields in this area will be preset
with the data from this download. Gener-
ally speaking you will not need to make
any settings in this area .
Domain
Specify the last part of your SIP address
(URI) here.
Example: For the SIP address
"[email protected]", enter
"provider.com" in Domain.
Proxy server address
The SIP proxy is your VoIP provider's
gateway server. Enter the IP address or
the (fully-qualified) DNS name of your
SIP proxy server.
Example: myprovider.com.
Proxy server port
Enter the number of the communica-
tion port that the SIP proxy uses to send
and receive signalling data (SIP port).
Port 5060 is used by most VoIP provid-
ers.
Registrar server
Enter the (fully-qualified) DNS name or
the IP address of the registrar server.
The registrar is needed when the
phone is registered. It assigns the pub-
lic IP address/port number to your SIP
address (Username@Domain) that were
used by the phone at registration. With
most VoIP providers, the registrar
server is identical to the SIP server.
Example: reg.myprovider.com.
Registrar server port
Enter the communication port used in
the registrar. It is mainly port 5060 that
is used.
Hide quick links:
Table of Contents
