Allen-Bradley SLC 500 Installation Instructions

Input simulator

Hide thumbs Also See for SLC 500:

SLC 500 Input Simulator

(Catalog Number 1746-SIM)

Application

The SLC 500 Input Simulator is designed for use on 16-point, 24V dc input modules

that incorporate a removable terminal block (RTB). The following table lists the

SLC 500 modules that may be used with the Input Simulator Module.

Catalog Number

1746-IB16

1746-ITB16

1746-IV16

1746-ITV16

1746-IN16

Installation Instructions

Module Description

Current Sinking DC Input Module

Fast Response Current Sinking DC Input Module

Current Sourcing DC Input Module

Fast Response Current Sourcing DC Input Module

24V AC/DC (sinking) Input Module

Publication 1746-IN024A-EN-P - October 2001

Page 1 (Catalog Number 1746-SIM) Application The SLC 500 Input Simulator is designed for use on 16-point, 24V dc input modules that incorporate a removable terminal block (RTB). The following table lists the SLC 500 modules that may be used with the Input Simulator Module.
Page 2 SLC 500 Input Simulator Installing the Input Simulator Installing the 1746-SIM on a module other than those listed ATTENTION above can damage the module and expose you to hazardous voltages. Never install or remove RTBs (removable terminal blocks) or ATTENTION modules while power is applied to the SLC system.
Page 3 3. Connect the 24V dc power supply to the terminals labeled A and B as stated in the instructions on the Input Simulator. In most instances, the 24V dc user power available in the SLC 500 power supply can be used. The Input Simulator A/B terminal block is removable for convenience in making this connection.
Page 4 – visiting www.theautomationbookstore.com and placing your order – calling 1.800.963.9548 (USA/Canada) or 001.330.725.1574 (Outside USA/Canada) SLC 500 is a trademark of Rockwell Automation. Publication 1746-IN024A-EN-P - October 2001 PN 40071-142-01(1) Copyright © 2001 Rockwell Automation. All rights reserved. Printed in the U.S.A.