Table of Contents
Chapter 7
Communicate with PanelView Terminals
Set Up the Hardware
92
In this example, the controller in the local chassis shares data with an HMI
application on a ControlNet network. This application could be running any of
these:
•
PanelView terminal
•
PanelView Plus terminal
•
Workstation running RSView 32 software
Workstation running an RSView Enterprise application, such as RSView
•
Machine Edition software or RSView Supervisory Edition software
Figure 14 - Example of Communication with PanelView and RSView Products
1
Item
Description
1
Local controller in any of these combinations:
• 1756 ControlLogix controller with a 1756-CN2 or 1756-CN2R communication
module in the chassis
• 1756 ControlLogix controller with a 1756-CNB or 1756-CNBR communication
module in the chassis
• 1768-L43 CompactLogix controller with a 1768-CNB or 1768-CNBR communication
module in the chassis
• 1769-L32C or 1769-L35CR CompactLogix controller
• 1789 SoftLogix controller with a 1784-PCICS communication card
• PowerFlex 700S with DriveLogix controller and a 1788-CNx ControlNet
communication card
2
HMI terminal
Make sure of the following:
•
The ControlNet communication modules are connected to a scheduled
ControlNet network.
•
All wiring and cabling are properly connected.
Rockwell Automation Publication
CNET-UM001E-EN-P - June 2016
2
Table of Contents
