1769 Compact I/O Communication Bus Expansion Cables For More Information Refer to this Document Pub. No. Information on installing and operating Compact 1769-IA16 120V ac Input 1769-5.1 your Compact 1769-IA16 module. Module Installation Instructions Information on installing and operating Compact 1769-OW8 AC/DC Relay 1769-5.2...
1769 Compact I/O Communication Bus Expansion Cables If you would like a manual, you can: • download a free electronic version from the internet: www.ab.com/micrologix or www.theautomationbookstore.com • purchase a printed manual by: – contacting your local distributor or Rockwell Automation representative –...
The 1769-CLLx, -CRRx, and -CRLx cables extend the 1769 bus communication lines. A maximum of two cables can be used in a 1769 system, allowing for three groups or banks of I/O modules. Each bank requires its own power supply.
1769 Compact I/O Communication Bus Expansion Cables System Configurations The following illustration show examples of two valid system setups. Right-to-Right Bank 1 I/O Slot Number Bank 2 Left-to-Left I/O Slot Number Bank 3 I/O Slot Number Right-to-Left Bank 1 Bank 2...
Worn contacts may create electrical resistance. Attaching Cables • A maximum of two expansion cables may be used in a 1769 system. Note: • Each I/O bank requires its own power supply. The 1769 cables extend the 1769 communication bus, but do not extend bus power.
Page 7
1769 Compact I/O Communication Bus Expansion Cables Right Cover Left Cover 1. Disconnect power 2. Check bus lever position. Left cover: Make sure the bus lever (4) on the left-most I/O module is in the unlocked (fully right) position. Right cover: Make sure the bus lever (4) on the right cover is in the unlocked (fully right) position.