Table of Contents
Basic Operations
The following is the basic procedure for operating the
camera. To get the most out of the videotaping
operation, we recommend you do the adjustments and
settings on the following pages.
Operating the Camera
1
Check that equipment connections, such as to the
VTR, are correct (see pages 32 to 36).
2
Turn the power switches to the camera and the all
the connected equipment to the ON position.
3
Set the IRIS selector on the zoom lens to "A" (see
page 52).
4
Select the appropriate position for the FILTER
selector for the ambient lighting (see page 54).
5
Remove the lens cap.
6
Set the following switches:
ABL switch: OFF
GAIN selector: 0 dB
WHITE BAL selector: A or B (see page 56)
VTR SELECT switch (on the camera adaptor):
corresponding to the VTR used
3
5
8
4
6
VTR SELECT switch
6
ABL switch
6
WHITE BAL selector
6
GAIN selector
7
Point the camera at an object that is at least one
1
meter (3
/
feet) from the lens.
2
8
Adjust the focus by turning the focus ring while
looking at the image on the monitor or viewfinder
screen.
43
Hide quick links:
Table of Contents
