Quick Links
APPLICATION
The C7772A,B,C,D Wallplate Temperature Sensors
provide a resistive output signal proportional to sensed
room or space temperature. The sensors are well suited
for low profile wall mounted applications where durability
and tamperproof construction is desired, such as
schools, prisons and institutions.
The C7772A Wallplate Temperature Sensors are
designed to be used with the Excel 5000 family, XL10,
XL15, T7350, and other Honeywell controllers.
4-1/2
(114)
2-3/4 (70)
Fig. 1. C7772 Dimensions in in. (mm).
INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a
hazardous condition.
2. Check the ratings given in the instructions and on
the product to make sure the product is suitable for
your application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out product
operation as provided in these instructions.
5. Follow local codes for installation and application.
® U.S. Registered Trademark
Copyright © 2004 Honeywell International Inc. • All Rights Reserved
Wallplate Temperature Sensors
3-5/16
(84)
5/16 (8)
IMPORTANT
All wiring must agree with applicable codes,
ordinances and regulations.
CAUTION
Electrical Shock or Equipment Damage
Hazard.
Can shock individuals or short equipment
circuitry.
Disconnect all power supplies before installation.
Location
The sensor should be located where it can sample an
average air temperature. Avoid locations where air
stratification can cause sensing errors. The sensor
mounts directly on a 2 in. x 4 in. conduit box with the
screws provided.
Mounting
To mount on conduit box (see Fig. 2):
1. Remove the appropriate knockout on the standard
utility conduit box for the application.
2. Make wiring connections to the system
components.
IMPORTANT
Level only for appearance. The sensor
functions normally even when not level.
M16295A
3. Use the No. 6 screws provided to mount the wall-
plate to the conduit box.
Wiring
CAUTION
Electrical Shock or Equipment Damage
Hazard.
Can shock individuals or short equipment
circuitry.
Disconnect all power supplies before installation.
C7772A,B,C,D
INSTALLATION INSTRUCTIONS
62-0215
Related Manuals for Honeywell C7772A
Summary of Contents for Honeywell C7772A
- Page 1 3. Installer must be a trained, experienced service technician. 4. After installation is complete, check out product operation as provided in these instructions. 5. Follow local codes for installation and application. ® U.S. Registered Trademark Copyright © 2004 Honeywell International Inc. • All Rights Reserved 62-0215...
- Page 2 12,654 1137 113.7 3571 By using this Honeywell literature, you agree that Honeywell will have no liability Automation and Control Solutions for any damages arising out of your use or modification to, the literature. You will Honeywell International Inc. Honeywell Limited-Honeywell Limitée...