Installation Instructions for the
®
TruStability
Board Mount Pressure Sensors
TSC Series, Compensated/Unamplified
±60 mbar to ±10 bar | ±6 kPa to ±1 MPa | ±1 psi to ±150 psi
Millivolt Analog Output
NSC Series, Uncompensated/Unamplified
±2.5 mbar to ±10 bar | ±250 Pa to ±1 MPa | ±1 inH
Millivolt Analog Output
Honeywell's TruStability
®
TSC Series and NSC Series are
piezoresistive silicon pressure sensors offering a ratiometric analog
output for reading pressure over the specified full scale pressure
span and temperature range.
TSC Series:
• Temperature compensated and unamplified.
• Compensation makes it easier to integrate the sensor into a
system by eliminating the need to calibrate the system over
temperature and also offers reduced part-to-part variation.
• Compensated temperature range is 0 °C to 85 °C [-32 °F to
185 °F].
• Operating temperature range is -40 °C to 85 °C [-40 °F to
185 °F].
• Measures differential or gage pressures
NSC Series:
• Uncompensated and unamplified.
• Allows customers the flexibility of performing their own
calibration while still benefiting from the industry-leading
stability, accuracy, and repeatability that the Honeywell
TruStability
®
Pressure Sensors provide.
• Operates as specified from -40 °C to 85 °C [-40 °F to 185 °F].
• Measures absolute, differential or gage pressures.
Table 1. Absolute Maximum Ratings
Characteristic
2
Supply voltage (V
)
:
supply
pressure ranges >60 mbar | 6 kPa | 1 psi
pressure ranges <40 mbar | 4 kPa | 20 inH
Storage temperature
Soldering time and temperature:
lead solder temperature (SIP, DIP)
peak reflow temperature (SMT)
1
Absolute maximum ratings are the extreme limits the device will withstand without damage.
2
Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.
1
Min.
-12.0
O
2
-40 [-40]
The absolute versions have an internal vacuum reference and an
output value proportional to absolute pressure. Differential versions
allow measurement of pressure between two pressure ports. Gage
versions are referenced to atmospheric pressure and provide an
output proportional to pressure variations from atmosphere.
The TSC Series and NSC Series sensors are intended for use with
non-corrosive, non-ionic gases, such as air. Port 1 can also be used
for non-corrosive, non-ionic liquids on sensors rated above 60 mbar
| 6 kPa | 1 psi.
The TSC and NSC Series offer numerous package styles and
mounting options, making it easier for device manufacturers to
integrate the product into their applications. These sensors offer
infinite resolution on the pressure signal. Frequency response is
also typically limited only by the end user's system. All products are
designed and manufactured according to ISO 9001.
0
4 s max. at 250 °C [482 °F]
15 s max. at 250 °C [482 °F]
O to ±150 psi
2
Max.
12.0
7
85 [185]
Issue 5
50063864
Unit
Vdc
°C [°F]